Delta Controls eZFC-424R4-24 Скачать руководство пользователя страница 53

Страница: 53 / 85

Setpoints Tab

Page 52 of 84

eZFC-424R4-24 Application Guide

Edition 2.6

When a zero value is entered in this field, there is no offset and you will not be able to enter a

setpoint offset on the LINKnet tab nor will a user will able to adjust the setpoint at a stat interface.

Eco Mode Setback (EcoModeSetBack)

The setback amount when the network sensor is in Eco mode.

For example, when you enter a value of 1.0, the setback is -1.0 from the heating setpoint and +1.0

from the cooling setpoint.

Standby Setback (StandbySetback)

The setback amount when the network sensor is in Standby occupancy mode.

For example, when you enter a value of 1.0, the setback is -1.0 from the heating setpoint and +1.0

from the cooling setpoint.

Discharge Air Temperature Limiting Setpoint Differentials

These setpoint fields are only enabled if you had configured a discharge air temperature sensor on

the Local Inputs tab.

Discharge Air Temperature High Limit Setpoint Differential (DATHiLimitSetpointDiff)

Discharge Air Temperature High Limit Setpoint Differential. Used to calculate the maximum limit

above the CurrentHeatSetPoint (AV800) maintained by the enteliZONE algorithm during ducted

heating stages.

Discharge Air Temperature Low Limit Setpoint Differential (DATLowLimitSetpointDiff)

Discharge Air Temperature Low Limit Setpoint Differential. Used to calculate the minimum limit

below the CurrentCoolSetpoint (AV801) maintained by the enteliZONE algorithm during ducted

cooling stages.

Содержание eZFC-424R4-24






















































































Результаты поиска

Содержание eZFC-424R4-24

Отзывы:

Бренды по названию

Популярные бренды

Delta Controls eZFC-424R4-24, Инструкция по применению

Результаты поиска

Содержание eZFC-424R4-24

Отзывы:

Бренды по названию

Популярные бренды