7
Customer Service [email protected]
www.DeltaChildren.com
• Fit the other base slots onto the cross tubes (Fig. 3).
• Push on the base near each cross tube to be sure it is in place.
• Insert four (M6 x 4 cm) screw through the hole in each base, the ends
of the legs and into the end of each cross tube (Fig. 5).
Hint: You may need to align the holes of all three parts to properly insert
the screw.
• Tighten the screw with the Phillips screwdriver.
• Repeat this procedure to fasten the legs, bases and cross tubes on the
other side of the assembly.
• Fit the ends of the leg into receptacle in each base (Fig. 4).
• Repeat this procedure to assemble the other leg to the storage basket
and bases.
3
4
5
Bassinet Frame Assembly
Base
Leg
M6 (4 CM) Hex Screw
(X4)
*Screw is actual size to scale
Fig. 3
Fig. 4
Fig. 5