Delphi Roady XT SA10276 Скачать руководство пользователя страница 1

Страница: 1 / 42

user guide

SA10276

Important: This manual contains important safety and operating information. Please read, understand, and follow the
instructions in this manual. Failure to do so could result in personal injury, death, and/or damage to your RoadyXT,
accessories, and/or to your vehicle or property

Please note that the power cable that has been supplied with your device is supplied with permanently attached ferrite beads.

It is the responsibility of the user to use the power cable with the ferrite beads.

The user is cautioned that changes or modifications not expressly approved by XM Satellite Radio Inc. can void the user’s

authority to operate this device.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC

Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the

installation instructions, may cause harmful interference to radio communications. However, there is no guarantee that interfer

ence will not occur in a particular installation. If this equipment does cause harmful interference to radio or television rece

tion, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by

one or more of the following measures:

Warning: The FCC and FAA have not certified the Delphi XM RoadyXT Satellite Radio Receiver for use in any aircraft

(neither portable nor permanent installation). Therefore, Delphi cannot support this type of application or installation.

This is the safety alert symbol. It is used to alert you

to potential personal injury hazards. Obey all safety

messages that follow this symbol to avoid possible

injury or death.

Table

of
Contents

FCC

Information

A Brief History

Let’s Get Started

Listening to XM

Personalizing Your RoadyXT

Listening to XM

Activating Your RoadyXT

Listening to XM

Personalizing Your RoadyXT

Warranty

Other Things You Should Know

Warranty

Vehicle Installation

Other Things You Should Know

FCC Information

. . . . . . . . . . . . . . . . . . . . . . .

A Brief History

. . . . . . . . . . . . . . . . . . . . . . . . .

About Delphi

. . . . . . . . . . . . . . . . . . . . . . . . .

About XM

. . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Let’s Get Started

. . . . . . . . . . . . . . . . . . . . . .

First, some important

reminders

. . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Controls

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Display

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Remote control

. . . . . . . . . . . . . . . . . . . . . .

Activating Your

RoadyXT

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Listening to XM

. . . . . . . . . . . . . . . . . . . . . . .

Selecting channels

. . . . . . . . . . . . . . . . .

Searching for channels

by category

. . . . . . . . . . . . . . . . . . . . . . . . . . .

Searching for channels

by scanning

. . . . . . . . . . . . . . . . . . . . . . . . . .

Using presets

. . . . . . . . . . . . . . . . . . . . . . . .

Memory and jump

. . . . . . . . . . . . . . . . .

Personalizing Your RoadyXT

. . . . . . .

Making your vehicle’s FM

radio an XM radio

. . . . . . . . . . . . . . . . . .

Screen colour

. . . . . . . . . . . . . . . . . . . . . . . . .

Contrast

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Audio level

. . . . . . . . . . . . . . . . . . . . . . . . . . . .

Aiming the antenna

. . . . . . . . . . . . . . .

TuneSelect

. . . . . . . . . . . . . . . . . . . . . . . . . . . .

Stock Ticker

. . . . . . . . . . . . . . . . . . . . . . . . . .

Info Extras

. . . . . . . . . . . . . . . . . . . . . . . . . . . .

Changing display information

. .

Direct Tune

. . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . .

Resetting to factory default

. . . . .

Vehicle Installation

. . . . . . . . . . . . . . . . . . .

Introduction

. . . . . . . . . . . . . . . . . . . . . . . . . .

Installation Instructions

. . . . . . . . . .

Other Things You

Should Know

. . . . . . . . . . . . . . . . . . . . . . . . . .

Care

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Accessories (sold separately)

. . .

Troubleshooting

. . . . . . . . . . . . . . . . . . . .

Contacting Technical Support

. .

Technical information

. . . . . . . . . . . . .

Warranty

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Delphi limited consumer

warranty

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

How you (the Customer)

can get service

. . . . . . . . . . . . . . . . . . . . . .

How provincial law relates to

the warranty

. . . . . . . . . . . . . . . . . . . . . . . . .

Table of Contents

Controls

disp

– change

what you see on

the display

up and down arrows,

select

– change chan-

nels, choose menu

options, TuneSelect

jump

– return to previous

channel; press and hold

to select one of the last

six FM frequencies used

for the modulator

numbers

– enter a

channel directly or

select favorite presets

menu

– access

advanced features

and configuration

options

pre/dir

– select

between direct

channel entry or up

to 30 presets

search

– look up channels

by category or scan all

channels

memory

– save

and recall up to

20 artist names

or song titles

power

About XM

XM Satellite Radio is North America’s leading provider of satellite radio. XM

offers up to 100 digital radio channels: commercial-free music channels

ranging from hip hop to opera, rock to bluegrass, big band to reggae; talk

radio channels, including news, sports, comedy, and children’s programming.

Subscribers pay a low monthly fee for the XM service, which was named Best

Radio Service by the music industry’s leading magazine Billboard at the 2004

Digital Entertainment Awards.

Exclusive programming on XM includes Major League Baseball® games for

every team, all season long. You can listen to XM on a variety of satellite radio

receivers for the vehicle, home, and portable use. XM is broadcast via satellite

from coast to coast, so you can listen to XM continuously as you travel across
the country.

About Delphi

Delphi is a worldwide leader in mobile electronics, vehicle components,

and audio technology. Delphi created the first in-dash car radio in 1936 and

continues its strong tradition of innovation in the audio industry. Now

Delphi technology has helped make satellite radio a reality, and Delphi

continues to expand its in-vehicle and consumer electronics technologies.

With its exciting line of satellite radio products, Delphi offers a broad

portfolio ofproducts to answer a wide variety of information and entertain-

ment needs—in the vehicle, home, office, or virtually anywhere.

Display

signal strength

–

1 to 3 bars

search by scanning

all channels

display

modes 5

search channels

by category

channel selection

mode

– direct

entry or preset

banks A, B, or C

additional info

– channel

name, channel number,

artist, song title, Stock

Ticker, and Info Extras

Remote control*

up and down arrows,

select

– change channels,

choose menu options,

TuneSelect

power

memory

– save and recall

up to 20 artist names or

song titles

display

– change what

you see on the display;

show artist name, song

title, channel number,

Stock Ticker, or Info Extras

pre/dir

– select between

direct channel entry or

up to 30 presets

search

– look up channels

by category or scan all

channels

jump

– return to previous channel;

press and hold to select one of

the last six FM frequencies used

for the modulator

menu

– access advanced

features and configuration

options

numbers

– enter a channel

directly or select favorite presets

+ and

– change channels, or

control volume if RoadyXT is

placed in an audio system

*Sold separately

Step

*Quotes are provided by ComStock, Inc. and cover most stocks listed on the NYSE, AMEX, or NASDAQ.

Market information is delayed by approximately 25 minutes.

**Extreme cold temperatures can affect the performance of the LCD in “Scroll” mode. We recommend you

change to the “Pages” mode until the temperature rises.

Auto-Off and “sleep” timer

You can set your RoadyXT to shut off the radio 1 to 3 hours after being

turned on. Set this option if you have connected your RoadyXT to a power

source in your vehicle that is always live. Your RoadyXT will then

automatically shut off and prevent you from draining your vehicle’s battery.

You can also use this feature as a “sleep” timer.
1. Press the “

menu

” button.

2. Select “Auto-Off.”
3. Select the desired time interval. Choose “Off” if you do not want to use

the sleep timer.

Resetting to factory default

You can return your RoadyXT to the state it was shipped from the factory.

Be careful: this will erase all settings, including Stock Ticker, Info Extras,

presets, display options, and audio options.
1. Press the “

menu

” button.

2. Select “Factory Default.”
3. Select “Yes” to restore your RoadyXT to the factory settings.

A Brief History

The new Delphi RoadyXT Satellite Radio Receiver—smaller, lighter, and

more versatile than the best-selling Roady2

• Dock your RoadyXT into cradles that are easily installed in your vehicles

or your home. One simple motion connects your RoadyXT’s power,

audio,and antenna.

• A built-in FM modulator allows you to hear XM programming on your

vehicle’s FM radio, using any unused frequency on the FM band.

• Exclusive Info Extras and Stock Ticker bring you personalized stock

information, sports scores, and more.

• TuneSelect alerts you when your favorite song is being played on any

XM channel.

option

Keep excess cable

behind or under the

dashboard.

Caution:

Use your RoadyXT only with the enclosed

components or approved accessories. Do not modify
wires or other connectors in any way; you could causea
malfunction, which could damage your RoadyXT and will
void your warranty.

Warning:

This manual contains important safety

and operating information. Please read, understand, and
follow the instructions in this manual. Failure to do
socould result in personal injury, death, and/or damage
to your RoadyXT, accessories, and/or to your vehicle or
property.

Caution:

Refrain from using food or drinks near

yourRoadyXT. Spilling food or drinks on the unit can
damage it. Also, improperly installing the antenna cable
can cause leaks, which can damage your RoadyXT and/or
your vehicle.

Warning:

When using this product it is

alwaysimportant to keep your eyes on the road and
yourhands on the wheel. Not doing so could result
ininjury and/or death to yourself or to others and/or
inproperty damage.

Let’s Get Started

First, some important reminders

We know you’re eager to turn on your new RoadyXT and listen to XM
Please take a moment to remember the following:

To receive the XM service, you must subscribe to XM. Available in the continental United States and Canada

only. Satellite radio reception depends on the ability of the antenna to receive a signal. The signal may not be

available in buildings or if obstructed (e.g., by mountains, trees, bridges, etc).

Troubleshooting

Your RoadyXT should provide you with trouble-free performance without-

needing any servicing. If it does not appear to be working properly, first try

to remedy the problem by following these steps:

1. Attach all connections firmly and securely.
2. Ensure the cigarette lighter adapter or auxiliary power socket is clean and

free of corrosion.

3. Check the adapter fuse by unscrewing the ribbed end of the adapter. If

required, replace with a 2-amp fuse only. If your cigarette lighter adapter-

does not have a removable end cap, then it is equipped with an internal-

fuse that resets itself after it is left unpowered for a period of time.

Step 3:

• Once you have plugged the power and

antenna jacks into the car cradle, use the
included cable organizer as shown in
figure 2 to improve the overall appear-
ance of the installation.

• Reuse the cable twist ties that were

provided with the power adapter and car
antenna cables and always be sure to
gather, bundle, twist tie, and secure any
excess cable remaining after determining
the best location for your satellite radio
installation.

• For example, secure the excess cable up

under your dash, between the seat and the console, or on the floor
under a seat or floor mat. This will help to prevent the excess cable from
interfering with the everyday use of your vehicle, improve the appear-
ance of the installation, and avoid any undesirable accidental damage to
the cables that might result in loss of power or satellite signal.

• For FM modulator installations, securing and tie-wrapping the excess

cable is important to reduce background hissing noise. Be sure to
choose a location carefully by taking notice of how doors and trunks
open and close, as well as how seats move when they are adjusted, so
you can be certain ample clearance is provided for the cables.

Screen colour

To change the colour of the display, press the “

menu

” button and select

“Screen Color.” Use the arrow and the “

select

” buttons to choose a colour; to

cancel, press the “

menu

” button.

Contrast

To vary the contrast of the display, press the “

menu

” button and

select“Contrast.” Use the arrow buttons to adjust the contrast, and press
the“

select

” button to confirm.

Audio level

You may adjust RoadyXT’s audio output level if it is too high (causing
distortion) or too low. Choose a setting so that the XM audio matches your
other audio sources, such as your CD player or FM radio. To change the audio
output level, press the “

menu

” button and select “Audio Level.” Use the

arrow buttons to adjust the level and the “

select

” button to confirm. Press

the “

menu

” button to exit.

Most users should NOT need to change this level from the factory setting.
This is not a volume control; you should set the volume using the audio
system that is connected to your RoadyXT.

Aiming the antenna

Note: For use with the Home Kit, sold separately.
Your RoadyXT can help you choose the best antenna position and

orientation.

1. Press the “

menu

” button. Use the arrow and “

select

” buttons to

choose“Antenna Aiming.”

2. Slowly turn and tilt the antenna. The signal bars on the display will

change. Find the position that gives at least two bars on either

“satellite”or “terrestrial.”

3. The antenna aiming screen remains as long as it’s needed to help you

position the antenna. When you’ve found the best position, press

the“

menu

” button twice to return to normal operation.

TuneSelect

TuneSelect can alert you whenever one of your favorite songs or artists is

playing on any XM channel.

1. Press the “menu” button and select the “TuneSelect” option, then select

“Song or Artist.” You can choose to select “By Song” (factory default)

or“By Artist.” Press the “menu” button again to return to normal

operation.

2. When you hear one of your favorite songs or artists, press and hold

the“select” button until you hear a beep. This indicates that RoadyXT has

saved the song or artist information to its TuneSelect list. The list holds

up to 20 entries; when it is full, any new entry replaces the oldest entry in

the list.

3. When any song or artist on the list is currently playing on any XM

channel,your RoadyXT beeps and flashes “Artist / Song Found” on its

display.4. Press the “select” button to switch to that channel.

5. To edit the list, press the “menu” button and choose the

“TuneSelect”option, then the “Erase” option. You can either erase specific

songs orartists on the list, or erase all songs and artists.

Stock Ticker

You can track up to 20 stock symbols and see their prices and movements

right on the RoadyXT’s display.*

TO ADD A STOCK SYMBOL:

1. Press the “menu” button, select “Stock Ticker,” and select “Add

Stocks.”

2. Use the arrow buttons to add each letter of the desired stock

symbol.Press the “select” button after choosing each letter. (Your

RoadyXT has alist of more than 9,000 stock symbols, and will not only

help you completeeach entry but prevents you from entering incorrect

symbols.)

3. When you’ve entered all your desired stock symbols, press the

“menu”button several times (or simply wait a few seconds) until your

RoadyXTreturns to normal operation.

4. Press the “disp” button until you see “Stocks” and a ticker across the

bottom of the screen.**

TO ERASE A STOCK SYMBOL:

1. Press the “menu” button , select “Stock Ticker,” and select “Erase Stocks.”
2. Choose “Erase All” or “Erase Some.”
3. If you’re erasing some stocks, press the arrow buttons to select the stock to

be deleted. Press the “select” button to erase the chosen stock symbol.

4. Press the “menu” button several times to return to normal operation.

Contacting Technical Support

For additional information in solving problems with your RoadyXT,

contact Delphi Technical Support at 1.877.GO DELPHI (1.877.463.3574),

8:00 a.m.— 8:00 p.m. Eastern Time, Monday — Friday.
Technical Support is also available at www.delphi.com.

Technical Information

DIMENSIONS

receiver, without cradle: 2.25 in (H) x 3.7 in (W) x 0.7 in (D)

5.7 cm (H) x 9.4 cm (W) x 1.8 cm (D)

remote:

3.7 in (H) x 1.7 in (W) x 0.6 in (D)

9.4 cm (H) x 4.3 cm (W) x 1.5 cm (D)

WEIGHT

receiver, without cradle: 2.6 oz

76 g

remote:

1 oz

30 g

POWER

receiver:

5 V, 2000 mA maximum current, positive polarity

remote:

1 CR2032 3 V cell

INPUTS AND OUTPUTS

antenna:

1 RF SMB connector

audio:

3.5 mm diameter mini-stereo jack

Warranty

Delphi limited consumer warranty

Delphi Product and Service Solutions (“Delphi”) warrants all XM Satellite Radio
Products sold by Delphi (each “Product”) to be free of defects in material and
workmanship, subject to the following conditions:

The duration of Delphi’s warranty with respect to each Product is limited to
one(1) year from the date of sale to the original consumer purchaser.

No other express warranties are made with respect to any Product. All implied
warranties, including warranties of merchantability and fitness for a particular
purpose are limited to the warranty period set forth above. This warranty is not
transferable and applies only to the original consumer purchaser of the Product.

Delphi will, as its sole obligation under this warranty, replace or repair, at
itsoption, any Product that does not conform to this warranty. Products may be
repaired or replaced with new or with refurbished items. This limited warranty
does not cover defects in appearance, cosmetic or decorative items, including
any non-operative parts. Under no circumstances will Delphi beliable for any
incidental or consequential damages under this warranty or any implied
warranties. These remedies are the customer’s exclusive remediesfor breach of
warranty. This limited warranty only extends to customers who purchase the
Products in Canada.

Delphi will not be responsible for damage resulting from any (i) deviation of
Delphi’s operating instructions as printed in Delphi’s catalog or on any
packaging, labels or other literature provided with a Product, (ii) installation of a
Product in a manner which is inconsistent with Delphi’s written instructions,

Changing display information

The Stock Ticker and Info Extras can either be scrolled (moving from right to
left in the display) or paged (one symbol at a time). To switch from one option
to the other:
1. Press the “

menu

” button and select “Display Mode.”

2. Choose either “Pages” or “Scroll.” Press the “

select

” button to confirm.

Direct Tune

Normally as you press the arrow buttons, you can preview what’s playingon
other XM channels before actually selecting a channel. To automatically tune to
a channel without having to press the “

select

” button, set the following option:

1. Press the “

menu

” button.

2. Select “Direct Tune.”
3. Select “On.” To return to the factory-default method, select “Off.”

Auto-On

When you use your RoadyXT in a car or truck, it normally turns on when you
switch on the vehicle’s ignition. If you prefer to manually turn on your RoadyXT
using its power button, set the following option:
1. Press the “

menu

” button.

2. Select “Auto-On.”
3. Select “On.” To return to the factory default, select “Off.”

You should also set this option to “Off” if your RoadyXT is connected to a
power source that is always live.

(iii) alteration or modification of a Product, (iv) misuse, (v) neglect, (vi) abuse,
(vii) accident, (viii) normal wear and tear, (ix) commercial use, (x) improper
storage, (xi) environmental conditions, including excessive temperature or
humidity, (xii) service by anyone other than a Delphi authorized repair facility,
(xiii) other improper application, installation or operation of this Product, or
(xiv) defects or malfunctions of which Delphi is not advised within ten (10) days
of the expiration of the limited warranty period.

How you (the Customer) can get service

To obtain warranty service during the first thirty (30) days after the date of

purchase, you must return the defective Product with the original receipt to the

original place of purchase. To obtain warranty service for all Products for the

remainder of the limited warranty period, you must contact Delphi by phone at

1.877.GO.DELPHI (1.877.463.3574). If further clarification or additional

information is required from Delphi, you may call Delphi at 1.877.GO.DELPHI

(1.877.463.3574).

If warranty service is needed at any time during the warranty period, the

purchaser will be required to furnish a sales receipt/proof of purchase

indicating the date of purchase, amount paid, and place of purchase.

Customers who fail to provide such proof of purchase will be charged for the

repair or replace-ment of any Product.

How provincial law relates to the warranty

Some provinces do not allow limitations on the duration of implied conditions

or warranties, or the exclusion or the limitation of Economic Loss. So the above

limitations or exclusions may not apply to you. This warranty gives you specific

legal rights. You may also have other rights that may vary from province to

province.

SA10276

RoadyXT, the XM name, Roady2, and related logos are trademarks of XM Satellite Radio Inc.

Printed on Recycled Paper

DPSS-07-E-002

Delphi Corporation
1441 West Long Lake Road
Troy, Michigan 48098-5090
U.S.A.Customer Service: [1] 877 GO DELPHI

www.delphi.com

Audio on XM instant traffic and weather
channels sounds different from other XM
channels.

Audio has static while listening through an
FM radio.

Nothing is wrong with your RoadyXT.
These channels use a different audio
technology than the other XM channels.

Change to another FM frequency (see
pages 16 and 17). If the problem persists
and you are using the FM modulator in a
vehicle, use the Delphi FM Direct Adapter
(model SA10112, sold separately).

If this happens:

You should:

The display is blank; nothing happens
when you push the power button.

Check the power connections to your
RoadyXT.

You do not receive all XM channels you
have subscribed to.

Your RoadyXT may not be activated.
Contact XM Satellite Radio (see page 10).

Audio sounds distorted when using the
built-in FM modulator.

Reduce audio output level (see page 18).

Audio is too soft when using the built-in
FM modulator.

Increase audio output level (see page 18).

No audio from your audio system.

Check whether your audio system can play
a CD, or regular AM or FM stations. Then
check the audio connections between
youraudio system and your RoadyXT.

No song title or artist name displayed.

Nothing is wrong with your RoadyXT. That
information may be in the process of being
updated. On some sports and news channels,
there is no title or artist information.

No audio when listening through your
vehicle’s FM radio.

Make sure that the vehicle’s FM radio and
your RoadyXT are set to the same frequency
(see page 16).

You cannot tune to a channel.

Contact XM Satellite Radio at 1.877.GET.XMSR
(1.877.438.9677). Verify that you are authorized
to receive that channel as part of your XM
subscription, and that you have not asked XM
Satellite Radio to block that channel.

If this happens:

You should:

UPDATING
Cause: Your RoadyXT is being updated
with the latest encryption code.

---
Cause: You may have tried to tune to a
channel that you have blocked or that you
cannot receive with your subscription
package.

Simply wait a few seconds until the update
is done.

To receive that channel, contact
XM Satellite Radio at 1.877.GET.XMSR
(1.877.438.9677)

If you see this on the display:

You should:

ANTENNA
Cause: Possible problem with XM antenna.

Connect the antenna. Make sure the cable
and connectors are not damaged or kinked.

ANTENNA
Cause: When using home stand or vehicle
cradle, home or car antenna is not plugged
in.

Make sure the home or car antenna is
plugged into the home stand or vehicle
cradle.

OFF AIR
Cause: The channel selected is not
currently broadcasting.

Tune to another channel.

NO SIGNAL
Cause: The XM signal is being blocked.

Move your RoadyXT away from the
obstructed area (e.g., an underground
garage).

If you see this on the display:

You should:

Personalizing Your RoadyXT

You can easily adapt your RoadyXT to suit your listening habits. Simply press
the “

menu

” button to see the options you can customize. If you ever get lost

or decide not to change anything, press the “

menu

” button several times to

return to normal operation. Or just wait about 15 seconds and RoadyXT
automatically cancels whatever you’re doing.

Making your vehicle’s FM radio an XM radio

You will first need to determine if your installation will require the use of the
FM modulator or the use of the cassette adapter. If your vehicle’s radio does
not have a cassette player, you will need to use either the Professional wired
FM or the self install method using the XMSureConnect. Please read the XM
SureConnect installation guide before installing.

Your RoadyXT contains a built-in FM modulator that transmits the XM audio
signal to your vehicle’s FM radio when using the vehicle cradle only.

1. Find an FM frequency that is not being used by any commercial FM station.

Tune your FM radio through the FM band and note which frequency has no
FM station or the least amount of interference. (See page 17 for more
information on finding an unused FM frequency.)

2. Turn on your RoadyXT.
3. Press the “menu” button and select “FM Frequency.”
4. Match the FM frequency that you found in step 1.

5. You should now hear XM programming on your vehicle’s FM radio. If the

sound isn’t clear or you hear noise or static, try another FM frequency. If
you’re traveling, you may need to retune periodically; this is due to the
differences in signal strength of local FM stations and is not a problem
with your RoadyXT.

6. Pressing and holding the “jump” button for 2 seconds pulls up a list of

the last six FM frequencies you selected. This allows you to quickly tune
to unused FM frequencies when using the FM modulator. Use the arrow
buttons and the “select” button to choose the frequency you want.

Memory and jump

Press the “

memory

” button to remember a song’s artist or title. Your

RoadyXT can remember up to 20 entries. (After 20, any new entry replaces
the oldest entry in memory.)
To recall the list of songs, press and hold the “

memory

” button, then use the

up and down arrow buttons to step through the list.
Press the “

jump

” button to return to the previous channel you were

listening to.
You can press and hold the “

jump

” button for FM presets. See page 16 for

more information.

• For option 1 and rear mounting locations, route the cable into the trunk
as shown. Always cross the weather seal at the lowest part of the trunk

to reduce water leaks. From the trunk, route the cable into the passenger

compartment through available wire channels and then along the floor

under the door jamb trim or under the carpet to the front of the passenger
compartment. Do not leave the cable loose in the passenger
compartment where it is likely to be damaged.

• For option 2 and front mounting locations, route the cable along the

door jamb and into the vehicle as shown. Route the cable across the
weather seal near the bottom of the door to reduce water leaks.

Other Things You Should Know

Care

You should be able to use your RoadyXT during most of your daily
activities. However, you should remember:

• If your RoadyXT does get dirty, wipe the case with a soft cloth (lightly

moistened with water if necessary), then wipe dry with another cloth.
Avoid chemicals such as paint thinner, alcohol, or abrasive cleansers.

• It is best to keep your RoadyXT out of direct sunlight or other sources

of extreme heat.

Accessories (sold separately)

We’re always developing useful and clever accessories for your RoadyXT

such as a Home Kit. For additional information and to purchase

accessories, please visit our web site at www.xmradio.ca or your local

retailer.

Caution:

Refrain from using food or drinks near the RoadyXT. Spilling food or drinks on the unit could damage

it. Also, improper antenna cable installation can cause a leak that could result in damage to your RoadyXT
and/or your vehicle.

Installation Instructions

Step 1

First, determine the proper location for your satellite radio antenna based

on the following criteria for your specific vehicle:

• You must locate the satellite radio antenna on the top of the roof either

in front of the rear window (option 1) or behind the windshield (option

2).The satellite radio antenna will perform best if magnetically attached

to a steel surface with an unobstructed view of the open sky and

minimum of 3 to 6 inches of metal surrounding the antenna.

Step 2

• When routing the antenna cable along the windshield or rear

window,tuck the antenna cable under the window seal to maintain a

professional looking installation and to avoid loose wires on the exterior

of the vehicle that are susceptible to damage. Follow the interior cable

routing diagram depicted by dashed lines in figure 1 where possible.

• Avoid kinking, crimping, twisting, or chafing the cable. Use pre-existing

wire channels when possible.

Vehicle Installation

Introduction

This XM receiver offers a variety of options for connecting XM Satellite

Radio to your vehicle’s FM radio. XM research and lab test results show

that using a vehicle cassette adapter can maximize the relationship

between the best sound quality and ease of installation. If your vehicle kit

does not include a cassette adapter, one should be available at your local

retailer.

1. Cassette Adapter

Using a cassette adapter for audio is the most popular and best

sounding solution. Please follow steps 1 through 3 on the following

pages for mounting the satellite radio antenna and securing the XM

receiver and cables.

2. Professional Wired FM

A wired FM installation kit is available from your retailer for professional

installation. See your retailer for details. This solution is recommended

if you cannot get acceptable performance with the FM modulator.

3. Self Install (XM SureConnect)

The XM receiver is equipped with an FM modulator, which can transmit

the XM audio to your car’s FM radio. See the XM SureConnect

Installation Guide for more information.

Info Extras

XM Satellite Radio will broadcast information such as sports scores and
other features at various times.*

Press the “

menu

” button and select “Info Extras” (step 1). Use the arrow

buttons to see what’s available (step 2).

Press the “

select

” button to add or remove the Info Extras item (step 3).

“” indicates that you have not yet selected the item; “

” means you’ve

chosen the item.

To view the Info Extras that you chose, press the “

disp

” button until you

see the Info Extras items at the bottom of the screen (display mode 5).

*Sports scores are provided by Stats, Inc.

Using presets

Your RoadyXT can store up to 30 of your favorite channels as presets. The
presets are organized into three banks (A, B, or C) that each contain 10
presets.

Press the “

pre/dir

” button one or more times to select bank A, B, or C

(step 1). After you’ve tuned to your desired channel, press and hold a
number button to save the channel into that preset (step 2).

Whenever you want to quickly tune to that channel, simply press that
button again.

You can use the preset banks to organize your channels in different ways:
Store your favorite channels in bank A, and someone else’s favorite
channels in bank B. Or use one bank for music, another for news.

Searching for channels by scanning

Your RoadyXT can also scan through each channel, pausing long enough
to hear the programming before moving on to the next one.

Press the “

menu

” button (step 1), go to “Search Mode,” and select “By

Scanning” (step 2).

Press the “

search

” button to begin scanning (step 3). Each channel plays

for about 5 seconds. While scanning channels, blinks in the display.
Press the “

search

” button again to stop on a channel.

Listening to XM

Selecting channels

Select a channel directly by entering its channel number. Press
the“

pre/dir

” button (step 1) until appears on the screen. Then press

the number buttons (step 2) corresponding to the channel. Channel 12 can
be entered as “1,” then by “2,” or as “0,” “1,” and “2.”

Or press the up and down arrows to quickly step through each channel.
When you find one you like, press the “

select

” button.

Searching for channels by category

XM channels are arranged by categories, or neighborhoods. This allows
you to see all channels in the “Rock” category, for example.

Press the “

menu

” button (step 1), go to “Search Mode,” and select “By

Category.”

Each press of the “

search

” button (step 2) tunes you to the first channel of

a new category.

Notice that the icon is highlighted in the display.

Use the arrow buttons (step 3) to sample the channels within a
category.Press the “

select

” button to choose a channel.

If you do nothing for 10 seconds, the radio automatically returns to the
normal channel selection method.

Warning:

When using this product it is always important to keep your eyes on the road and your hands on the

wheel. Not doing so could result in injury and/or death to yourself or to others and/or in property damage.

Warning:

When using this product it is always

important to keep your eyes on the road and your hands
on the wheel. Not doing so could result in injury and/or
death to yourself or to others and/or in property damage.

Warning:

Failure to properly follow all installation

instructions may result in personal injury, death,and/or
damage to your RoadyXT, accessories, and/or to your
vehicle or property.

Activating Your RoadyXT

Use the arrow buttons to find channel 0, then push the “

select

” button to

choose it. You should see an 8-character XM Radio ID in the display. (The

XM Radio ID should also be on the bottom of your RoadyXT, and on the

package.) Write the ID here:

Activate your XM Satellite Radio service by contacting XM at

https://activate.xmradio.ca or by calling 1.877.GET.XMSR (1.877.438.9677)