background image

This heater has ECC (electronic climate control) which automatically monitors and selects the ideal power to maintain a
chosen temperature.

HOW TO USE IT

Insert the plug into the mains socket and switch on, pressing the       button (fig. 5) one or more times, to select your ope-
rating heating power as follows:

4

Press once
Maximum power

Press twice
Medium power

Press three times
Minimum power

Press four times
OFF

A

B

C

D

If maximum power has been selected, adjust the thermostat dial (fig. 6) to the desired comfort
temperature from     (5°C) and MAX (35°C).
If the selected temperature is higher than the actual room temperature, the appliance will start
automatically and rapidly heat the room until it reaches the selected temperature. The unit will
automatically maintain the temperature at a constant level by cycling between max power, med
power and min power as it approaches the selected comfort temperature (see fig. 7).

Maximum power example (fig. 7)

MAX

MAX

MED

MIN

OFF

Cycles between

Display LEDs

*

If the room temperature exceeds the selected temperature level, the appliance will switch off (fig. 5D). The heater will
switch back on automatically when the room temperature falls below the selected temperature level.
If medium power level has been selected using the      button, and the thermostat set, the heater will modulate between
the medium and minimum power levels. As with the maximum power setting, if the room temperature exceeds the select-
ed temperature, the appliance will switch off, and then on again when the temperature falls.
(For models with timer, ensure that the switch on the timer dial (fig.4) is in position 

1

, manual.

NOTE: if the timer switch is at the 

0

position (fig.4), the heater is off and will not operate)

.

Fig. 6

The LEDs on

the left hand

side show you

the power

selected

The LEDs on the right
hand side show you
the actual power the
heater is operating at. 

Important: 

when the

heater has been set for
timed operation and is
in a standby period (i.e
waiting to come on),
the LEDs on the right
hand side will light up
and go out intermitten-
tly. (See timer instruc-
tions).

Button

Fig. 5

Selected power

Power used

5713003700  11-06-2002  14:03  Pagina 4

Отзывы: