6
Adjusting the thermostat:
When the room has reached the desired temperature, slowly turn the thermostat knob
counter-clockwise until you hear a “click”, and not beyond that point. The thermostat will
then adjust that set temperature automatically and keep it constant.
Anti-freeze function
With the thermostat in position and the switches on, the appliance keeps the room at a tem-
perature of approx. 41° F (5° C ), preventing freezing with minimum energy consumption.
Switching the appliance off:
To turn appliance off, switch off both switches then remove
the plug from the electrical outlet.
Additional features:
Front Safety Guards- prevent the front grill from touching the floor
when the heater is tipped over forward.
-
Convenient Carry Handle-allows for easy transport from room to room.
MAINTENANCE AND SERVICE
Always remove the plug from the power socket and allow the heater to cool. After the
heater has cooled, clean it with a soft damp cloth, do not use detergents or abrasives. Peri-
odically clean the air intake and outlet grilles during the period in which the heater is in
use with a vacuum cleaner. Should the heater not be in use over a certain length of time,
wrap the cable and store it in a dry place. This appliance has been built to provide many
years of trouble free service. In case of malfunction, do not try to repair the heater yourself:
it may result in fire hazard or electric shock. Call the nearest Service Center (see attached
list of Service Centers).
ATTENTION
A safety device switches the fan heater off if it accidentally overheats. To reset the unit for
normal operation, remove the plug from the outlet for a few minutes, eliminate the cause of
overheating (e.g. air intake or outlet grilles obstructed) and then plug the fan heater back
in again. Contact your nearest Service Center if the fan heater does not begin normal
operation again.
The appliance is equipped with a double tip-over-switch for extra safety. This device turns
the appliance off should it fall over or if it is not perfectly stable. To restart the appliance,
simply place it upright again.
TROUBLESHOOTING
PROBLEM
CAUSE
SOLUTION
The appliance doesn’t work • Be sure it is plugged in and
that the electrical outlet is
working.
• Check for any obstruction.
• The switches are in the OFF
position.
• The thermostat may be set too
low.
• The appliance is not in the
upright position.
• Plug into the mains.
• Remove the obstruction and
let the appliance cool down.
If the appliance doesn’t work
please contact the nearest
service center.
• Switch on the appliance.
• Turn the thermostat to a
higher setting until the hea-
ter restarts.
• Check the appliance is in the
upright position in a flat sur-
face.
Содержание DUH 500
Страница 2: ...2...
