DeLonghi DINAMICA PLUS ECAM37 85 Series, Инструкция по эксплуатации

Страница: 22 / 28

22
DISPLAYED MESSAGE POSSIBLE CAUSE REMEDY
INSERT MILK CONTAINER The milk container (E) is not inserted correctly. Insert the milk container, pushing it as far as
it will go.
INSERT INFUSER ASSEMBLY The infuser (A20) has not been replaced after
cleaning. Insert the infuser as described in section "12.9
Cleaning the infuser".
WATER CIRCUIT EMPTY
PRESS OK TO START
:
The water circuit is empty Press the selector corresponding to "OK" to
deliver water from the spout (D6) until it flows
out normally.
If the problem persists, make sure the water
tank (A17) is fully inserted.
PRESS OK TO CLEAN OR TURN
DIAL
:
The milk container has been inserted with
the froth adjustment dial (E1) in the CLEAN
position. To proceed with the CLEAN function, press the
selector corresponding to "OK", or turn the froth
adjustment dial to one of the milk positions.
→