DeLonghi DINAMICA PLUS ECAM37 85 Series, Инструкция по эксплуатации

Страница: 16 / 28

16
31 32
4. Wash all the components thoroughly with hot water and
mild washing-up liquid. All components are dishwash-
er safe, but must be placed in the top basket of the
dishwasher.
Make sure there are no milk residues on the
hollow and groove under the dial (fig. 32). If necessary,
scrape the groove with a toothpick;
5. Rinse inside the froth adjustment dial seat with running
water (fig. 33);
33
6. Check that the intake tube and spout are not clogged with
milk residues;
7. Replace the dial (in correspondence to the word "INSERT"),
spout and milk intake tube;
8. Place the lid back on the milk container (E2).
12.11 Cleaning the hot water nozzle
Each time you prepare milk, clean the connection nozzle (A8)
with a sponge to remove milk residues from the gaskets (fig.
21).
13. DESCALING
Important!
• Before use, read the instructions and the labelling on the
descaler pack.
• It is important to use De’Longhi descaler only. Using un-
suitable descaler and/or performing descaling incorrectly
may result in faults not covered by the manufacturer's
guarantee.
Descale the appliance when "DESCALING NEEDED" "PRESS OK TO
START (~45min)" appears on the display: To descale immedi-
ately, press
and follow the operations from point 3.
To descale the appliance later, press . The
symbol appears on the display to remind you that the appliance
needs descaling. (The message appears each time you turn the
appliance on).
To access the descaling menu:
1. Pressthe "
" button (C3) to enter the menu;
2. Press "DESCALE" and follow the instructions on the
display;
3. "REMOVE WATER FILTER" (fig. 34): extract the water tank
(A17), remove the water softener filter (D7) (if present)
and empty the water tank. Press
;
34 35
A
B
A B
+
4. "DESCALER (LEVEL A)" "AND WATER (LEVEL B)" (fig. 35);
Pour the descaler into the tank up to the level A marked
inside the tank (equal to one 100ml pack), then add water
(one litre) up to level B and put the water tank back. Press
;
5. "EMPTY DRIP TRAY" (fig. 22):
6. Remove, empty and replace the drip tray (A15) and
grounds container (A11). Press ;
7. "POSITION 2l CONTAINER" "OK TO START":
Place an empty container with a minimum capacity of 2 litres
under the hot water spout (D6) and coffee spouts (A9) (fig. 9);
Important! Danger of scalding
Hot water containing acid flows from the hot water and coffee
spouts. Take care to avoid contact with splashes of this solution.
8. Press "
" to confirm that you have added
the descaling solution. "DESCALING UNDERWAY" "PLEASE
WAIT" is displayed: The descale programme starts and
the descaler liquid comes out of the hot water and coffee