background image

30

Insert the spit moving

deflector 

B

 sideways

Spit is inserted

correctly

Figure 17

B

C

A

D

Figure 16

USE OF THE GRILL

Turn the switch knob to position  .

Set the temperature if a temperature different from the pre-set one is required.

Leave to warm up for approximately 5 minutes with the door closed.

Introduce the food to be cooked, positioning the grill tray as close to the grill as possible.

Always grill with the oven door closed.

USE OF THE ROTISSERIE

 (Fig. 16)

 

Put the baking tray in the last rung at the bottom and mount the spit support “

C

”.

 

Put the meat to be cooked on the spit making sure that it is fixed centrally with the 

forks.

 

Put spit “

A

” into the motor hole moving 

the protection deflector “

B

” sideways. If 

the spit is inserted correctly it cannot be 

turned with the hands.

 

Put the spit collar “

D

” on support 

C

”; then remove the heat-protection 

handgrip turning it anticlockwise.

 

Switch the oven on positioning the fun-

ction selector knob on position   . 

Make sure that the spit turns.

 

Set the temperature if a temperature dif-

ferent from the pre-set one is required.

Note: The rotation direction of the rotisserie 

can be either clockwise or counter-clockwise.

ATTENTION: The oven door becomes very hot during operation.

Keep children away.

IMPORTANT: In all cooking functions the oven must always be used with the door 

closed.

Содержание DE609MP

















































Отзывы: