background image

Toaster

Cleaning and Maintenance

• Before cleaning: remove plug, switch off at the mains and allow

to cool.

• To clean the inside, turn the toaster upside down over the sink

and gently shake.

• Empty the crumb tray regularly - see "Crumb tray" section on

page 3.

• Use a soft dampened cloth to wipe the outside of the toaster

and dry with a soft, dry cloth.

• DO NOT use metal polish or harsh scouring agents.
• DO NOT immerse your toaster in any form of liquid.
• DO NOT use any sharp or pointed articles for cleaning the

inside as this will damage the heating element.

• NEVER put metal objects or your fingers into the toasting slots.

Safety Warnings 

• The appliance is exclusively for the use for which it has been

manufactured. Any other use is to be considered inappropriate
and therefore dangerous. The manufacturer cannot be held
responsible for eventual damage caused by inappropriate,
improper or irresponsible use and/or for repairs made to the
product by unauthorised personnel.

• After removing the appliance from the packaging, make sure

that the product is complete and in perfect condition.

• The plastic bag in which the appliance was packaged should be

kept out of reach of children as it poses a suffocation hazard.

• In order to remove the dust that may have accumulated on the

appliance, simply dust it off with a soft cloth.

• Before inserting the plug into the electrical socket, make certain:

- The voltage of the socket corresponds to the value indicated 

on the information label, attached to the appliance.

- The electrical socket  is adequately earthed, the manufacturer 

declines any responsibility for the lack of observation of this 
norm.

• In the case of incompatibility between the socket  and the plug

of the appliance, have it replaced by a qualified technician. The
use of adapters, multiple socket units and/or extension cables is
not recommended. Whenever it may be necessary to use such
equipment, it is advisable to use only single or multiple adapters
or extension cables which comply with the current safety stan-
dards, and make sure not to exceed the wattage limit of the
adapter or extension cable.

• If the supply cord is damaged, it must be replaced by the manu-

facturer, its service agent or similarly qualified persons  in order
to avoid a hazard.

• When the appliance is plugged into the electrical socket and whilst

switched on never place hands into the bread toasting slots.

• Never allow the appliance to be used by children or used with-

out adult supervision.

• This appliance is not intended for use by children or other per-

sons without assistance or supervision if their physical, sensory

5

Содержание CT04R









Отзывы: