manualshive.com logo in svg

Dell Z9000, Руководство по настройке

Поделиться
Скачать
Dell Z9000 Скачать руководство пользователя страница 734

Configuring When to Re-generate an SSH Key 

You can configure the time-based or volume-based rekey threshold for an SSH session. If both threshold 
types are configured, the session rekeys when either one of the thresholds is reached.

To configure the time or volume rekey threshold at which to re-generate the SSH key during an SSH 
session, use the 

ip ssh rekey

 [

time

 

rekey-interval

] [

volume

 

rekey-limit

] command. 

CONFIGURATION mode.

Configure the following parameters:

•

rekey-interval:

 time-based rekey threshold for an SSH session. The range is from 10 to 1440 minutes. 

The default is 

60 

minutes.

•

rekey-limit

: volume-based rekey threshold for an SSH session. The range is from 1 to 4096 to 

megabytes.  The default is 

1024 

megabytes.

Examples

The following example configures the time-based rekey threshold for an SSH session to 30 minutes.

Dell(conf)#ip ssh rekey time 30 

The following example configures the volume-based rekey threshold for an SSH session to 4096 
megabytes.

Dell(conf)#ip ssh rekey volume 4096

Configuring the SSH Server Key Exchange Algorithm

To configure the key exchange algorithm for the SSH server, use the 

ip ssh server kex 

key-

exchange-algorithm

 command in CONFIGURATION mode.

key-exchange-algorithm 

: Enter a space-delimited list of key exchange algorithms that will be used by 

the SSH server.

The following key exchange algorithms are available:

• diffie-hellman-group-exchange-sha1
• diffie-hellman-group1-sha1
• diffie-hellman-group14-sha1

The default key exchange algorithms are the following:

• diffie-hellman-group-exchange-sha1
• diffie-hellman-group1-sha1
• diffie-hellman-group14-sha1

When FIPS is enabled, the default is diffie-hellman-group14-sha1.

Example of Configuring a Key Exchange Algorithm

734

Security

Содержание Z9000









































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды