![Dell Z9000 Скачать руководство пользователя страница 730](http://html.mh-extra.com/html/dell/z9000/z9000_configuration-manual_84483730.webp)
4.
Assign the
method-list
to the terminal line.
LINE mode
login authentication {
method-list-name
| default}
Example of a Failed Authentication
To view the configuration, use the
show config
in LINE mode or the
show running-config tacacs
+
command in EXEC Privilege mode.
If authentication fails using the primary method, Dell Networking OS employs the second method (or
third method, if necessary) automatically. For example, if the server is reachable, but the server
key is invalid, Dell Networking OS proceeds to the next authentication method. In the following example,
the is incorrect, but the user is still authenticated by the secondary method.
First bold line: Server key purposely changed to incorrect value.
Second bold line: User authenticated using the secondary method.
Dell(conf)#
Dell(conf)#do show run aaa
!
aaa authentication enable default enable
aaa authentication enable LOCAL enable
aaa authentication login default local
aaa authentication login LOCAL local
aaa authorization exec default none
aaa authorization commands 1 default none
aaa authorization commands 15 default none
aaa accounting exec default start-stop
aaa accounting commands 1 default start-stop
aaa accounting commands 15 default start-stop
Dell(conf)#
Dell(conf)#do show run
!
tacacs-server key 7 d05206c308f4d35b
tacacs-server host 10.10.10.10 timeout 1
Dell(conf)#
tacacs-server key angeline
Dell(conf)#%RPM0-P:CP %SEC-5-LOGIN_SUCCESS: Login successful for user admin on
vty0 (10.11.9.209)
%RPM0-P:CP %SEC-3-AUTHENTICATION_ENABLE_SUCCESS: Enable password
authentication success on vty0 ( 10.11.9.209 )
%RPM0-P:CP %SEC-5-LOGOUT: Exec session is terminated for user admin on line
vty0 (10.11.9.209)
Dell(conf)#username angeline password angeline
Dell(conf)#%RPM0-P:CP %SEC-5-LOGIN_SUCCESS: Login successful for user angeline
on vty0 (10.11.9.209)
%RPM0-P:CP %SEC-3-AUTHENTICATION_ENABLE_SUCCESS: Enable password
authentication success on vty0 ( 10.11.9.209 )
Monitoring
To view information on transactions, use the following command.
• View transactions to troubleshoot problems.
EXEC Privilege mode
debug
730
Security
Содержание Z9000
