Dell Z9000 Скачать руководство пользователя страница 717

Страница: 717 / 968

To view the configuration, use the

show config

command in LINE mode or the

show running-

config

in EXEC Privilege mode.

NOTE: Dell Networking recommends using the

none

method only as a backup. This method does

not authenticate users. The

none

and

enable

methods do not work with secure shell (SSH).

You can create multiple method lists and assign them to different terminal lines.

Enabling AAA Authentication

To enable AAA authentication, use the following command.

• Enable AAA authentication.

CONFIGURATION mode

aaa authentication enable {

method-list-name

| default}

method1

[

... method4

]

–

default

: uses the listed authentication methods that follow this argument as the default list of

methods when a user logs in.

–

method-list-name

: character string used to name the list of enable authentication methods

activated when a user logs in.

–

method1

[

... method4

]

: any of the following: RADIUS, TACACS, enable, line, none.

If you do not set the default list, only the local enable is checked. This setting has the same effect as
issuing an

aaa authentication enable default enable

command.

Enabling AAA Authentication — RADIUS

To enable authentication from the RADIUS server, and use TACACS as a backup, use the following

commands.

Enable RADIUS and set up TACACS as backup.
CONFIGURATION mode

aaa authentication enable default radius tacacs

Establish a host address and password.
CONFIGURATION mode

radius-server host x.x.x.x key some-password

Establish a host address and password.
CONFIGURATION mode

tacacs-server host x.x.x.x key some-password

Examples of the

enable

commands for RADIUS

To get

enable authentication

from the RADIUS server and use TACACS as a backup, issue the

following commands.
The following example shows enabling authentication from the RADIUS server.

Dell(config)# aaa authentication enable default radius tacacs

Radius and TACACS server has to be properly setup for this.

Dell(config)# radius-server host x.x.x.x key <some-password>

Dell(config)# tacacs-server host x.x.x.x key <some-password>

Security

717

Содержание Z9000









































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание Z9000

Отзывы:

Бренды по названию

Популярные бренды

Dell Z9000, Руководство по настройке

Результаты поиска

Содержание Z9000

Отзывы:

Бренды по названию

Популярные бренды