Dell XPS 13 7390 2-in-1, Руководство по обслуживанию

Страница: 16 / 49

Steps
1. Adhere the magnet and the metal bar to the battery.
NOTE: Install the magnet and the metal bar from the faulty battery.
2. Align the screw holes on the battery with the screw holes on the system board and palm-rest assembly.
3. Replace the two screws (M1.2x4) that secure the battery to the system board.
4. Replace the seven screws (M1.6x3) that secure the battery to the palm-rest assembly.
5. Place the interposer board to the connector on the system board.
NOTE: The interposer board is not polarity sensitive and both sides are compatible.
6. Connect the battery cable to the interposer board.
7. Replace the Torx 5 screw (M1.6x3.4) that secures the battery cable to the system board.
Next steps
1. Install the base cover .
2. Follow the procedure in After working inside your computer .
Display assembly
Removing the display assembly
Prerequisites
1. Follow the procedure in Before working inside your computer .
2. Remove the base cover .
3. Remove the battery .
About this task
The following images indicate the location of display assembly and provide a visual representation of the removal procedure.
16 Removing and installing components