Installing the Input and Output board
1
Align and place the IO board to the slot on the palmrest and keyboard assembly [1].
2
Replace the two (M2x3) screws to secure the IO board to the palmrest and keyboard assembly [2].
3
Connect the IO board cable to the connector on the IO board and close the IO board connector latch [3].
4
Affix the adhesive tape to secure the IO board connector [4].
5
Connect the fingerprint reader cable to the connector on the IO board [5].
44
Removing and installing components
Содержание Vostro 5481
Страница 1: ...Dell Vostro 5481 Service Manual Regulatory Model P92G Regulatory Type P92G001 ...
Страница 5: ...Contacting Dell 75 Contents 5 ...
Страница 47: ...g Open the display assembly at an angle of 90 degrees Removing and installing components 47 ...
Страница 49: ...Removing and installing components 49 ...