1. Align the notch on the solid-state drive with the tab on the solid-state drive slot and slide the solid-state drive into the solid-state drive
slot on the system board.
2. Slide the solid-state bracket on to the solid-state drive on the system board.
3. Replace the screw (M2x2.5) that secures the solid-state drive to the system board.
4. Adhere the mylar tape that secures the heat sink to the system board.
1. Install the
.
2. Install the
.
3. Follow the procedure in
After working inside your computer
.
Heat sink
Removing the heat sink
1. Follow the procedure in
Before working inside your computer
.
2. Remove the
3. Remove the
.
The following image indicates the location of the heat sink and provides a visual representation of the removal procedure.
20
Removing and installing components
Содержание Vostro 5391
