Dell Vostro 3590 Скачать руководство пользователя страница 86

Страница: 86 / 95

Option

Description

Full Screen Logo

•

Enable Full Screen Logo—not enabled

Warnings and Errors This option causes the boot process to only pause when warnings or errors are detected, rather than stop, prompt,

and wait for user input.

•

Prompt on Warnings and Errors — enabled (default)

•

Continue on warnings

•

Continue on Warnings and Errors

Sign of Life
Indication

The option " Enable Sign of Life Keyboard Backlight Indication" is selected by default

Virtualization support screen options

Option

Description

Virtualization

Allows you to enable or disable the Intel Virtualization Technology.
Enable Intel Virtualization Technology: This option is enabled by default.

VT for Direct I/O

Enables or disables the Virtual Machine Monitor (VMM) from utilizing the additional hardware capabilities provided
by Intel® Virtualization technology for direct I/O.
Enable VT for Direct I/O: This option is enabled by default.

Wireless screen options

Option

Description

Wireless Switch

This setting determines which wireless devices can be controlled by the Wireless Switch.

•

WWAN

— enabled by default

•

WLAN

— enabled by default

•

Bluetooth

— enabled by default

•

GPS (on WWAN Module)

— enabled by default

Wireless Device
Enable

Allows you to enable or disable the internal wireless devices.

•

WLAN

•

Bluetooth

•

WWAN/GPS

All the options are enabled by default.

Maintenance screen options

Option

Description

Service Tag

Displays the Service Tag of your computer.

Asset Tag

Allows you to create a system asset tag if an asset tag is not already set. This option is not set by default.

System setup options

Содержание Vostro 3590
































































































Результаты поиска

Содержание Vostro 3590

Отзывы:

Бренды по названию

Популярные бренды

Dell Vostro 3590, Руководство пользователя

Результаты поиска

Содержание Vostro 3590

Отзывы:

Бренды по названию

Популярные бренды