Dell Vostro 3490 Скачать руководство пользователя страница 85 | Manualshive

Страница: 85 / 96

background image

Option

Description

Drives

Allows you to enable or disable the various drives on-board:

•

SATA-0 (enabled by default)

•

SATA-1 (enabled by default)

•

SATA-2 (enabled by default)

•

M.2 PCIe SSD-0 (enabled by default)

Smart Reporting

This field controls whether hard drive errors for integrated drives are reported during system
startup. The

Enable Smart Reporting option

is disabled by default.

USB Configuration

Allows you to enable or disable the integrated USB controller for:

•

Enable USB Boot Support

•

Enable External USB Port

All the options are enabled by default.

Audio

Allows you to enable or disable the integrated audio controller. The option

Enable Audio

is selected

by default.

•

Enable Microphone

•

Enable Internal Speaker

Both the options are selected by default.

Miscellaneous Devices

Allows you to enable or disable the following devices:

•

Enable Camera (enabled by default)

Video

Option

Description

LCD Brightness

Allows you to set the display brightness depending up on the power source—On Battery and On AC. The LCD
brightness is independent for battery and AC adapter. It can be set using the slider.

NOTE:

The video setting is visible only when a video card is installed into the system.

Security

Table 4. Security

Option

Description

Admin Password

Allows you to set, change, and delete the admin password.

System Password

Allows you to set, change, and delete the system password.

Strong Password

This option lets you enable or disable strong passwords for the system.

Password Configuration

Allows you to control the minimum and maximum number of characters allowed for a administrative
password and the system password. The range of characters is between 4 and 32.

Password Bypass

This option lets you bypass the System (Boot) Password and the internal HDD password prompts
during a system restart.

•

Disabled — Always prompt for the system and internal HDD password when they are set. This
option is enabled by default.

•

Reboot Bypass — Bypass the password prompts on Restarts (warm boots).

NOTE:

The system will always prompt for the system and internal HDD passwords

when powered on from the off state (a cold boot). Also, the system will always prompt
for passwords on any module bay HDDs that may be present.

System setup

85

«
...
83
84
85
86
87
...
»

Содержание Vostro 3490

































































































Отзывы:

Нет отзывов

Похожие инструкции для Vostro 3490

Бренд: XMG Страницы: 23

Бренд: Compaq Страницы: 110

Бренд: Hyundai Страницы: 24

A215-S6814 - Satellite - Turion 64 X2 2.2 GHz

Бренд: Toshiba Страницы: 3

A215-S5849 - Satellite - Turion 64 X2 2 GHz

Бренд: Toshiba Страницы: 3

A215-S6820 - Satellite - Turion 64 X2 2.2 GHz

Бренд: Toshiba Страницы: 4

Бренд: Toshiba Страницы: 170

Бренд: Toshiba Страницы: 4

Бренд: Toshiba Страницы: 4

Бренд: Toshiba Страницы: 4

Бренд: Toshiba Страницы: 4

Бренд: Toshiba Страницы: 4

Бренд: Toshiba Страницы: 4

Бренд: Toshiba Страницы: 4

Бренд: Toshiba Страницы: 4

Бренд: Toshiba Страницы: 4

Бренд: Toshiba Страницы: 4

Бренд: Toshiba Страницы: 4

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды