manualshive.com logo in svg

Dell Vostro 3470, Руководство по обслуживанию, Страница: 6 / 80

Поделиться
Скачать
Dell Vostro 3470 Скачать руководство пользователя страница 6

3 

Turn off your computer.

4 

Disconnect all network cables from the computer.

CAUTION: 

To disconnect a network cable, first unplug the cable from your computer and then unplug the cable from the 

network device.

5 

Disconnect your computer and all attached devices from their electrical outlets.

6 

Press and hold the power button while the computer is unplugged to ground the system board.

NOTE: 

To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an 

unpainted metal surface at the same time as touching a connector on the back of the computer.

After working inside your computer

After you complete any replacement procedure, ensure that you connect any external devices, cards, and cables before turning on your 
computer.

1 

Connect any telephone or network cables to your computer.

CAUTION: 

To connect a network cable, first plug the cable into the network device and then plug it into the 

computer.

2 

Connect your computer and all attached devices to their electrical outlets.

3 

Turn on your computer.

4 

If required, verify that the computer works correctly by running 

ePSA diagnostics

.

6

Working on your computer

Содержание Vostro 3470

















































































Отзывы:

Нет отзывов