Installing the Stand Cage
1.
Align the stand cage with the screw holes and tighten the screws to secure it to the computer.
2.
Install:
a.
b.
3.
After Working Inside Your Computer
Removing the Power-Switch Board
1.
Before Working Inside Your Computer
.
2.
Remove:
a.
b.
3.
Perform the following:
a. Press the locking tab that secures the power-switch to the computer [1].
b. Lift the power-switch board to release it from the slot [2].
4.
Lift the lock tab and disconnect the power-switch cable from the power-switch board [1.2].
14
