4.
Lift the heatsink from the system board.
Installing the Heatsink
1.
Install the heatsink to align with the screw holes on the system board.
2.
Tighten the screws to secure the heatsink to the system board.
NOTE: Secure the screws in the order of the callout numbers [1, 2, 3, 4, 5, 6] as seen on the
heatsink module.
3.
Install:
a.
b.
4.
After Working Inside Your Computer
Removing the WLAN Card
1.
Before Working Inside Your Computer
.
2.
Remove:
a.
b.
3.
To remove the WLAN card:
a. Remove the screw that secures the WLAN card [1].
b. Slide to remove the WLAN bracket from the system board [2].
c. Disconnect the antenna cables from the WLAN card.[3].
d. Remove the WLAN card from its slot [4].
12
