b
c
d
3
To remove the heat sink:
a Loosen the captive screws that secure the heat sink to the system board [1, 2, 3, 4,5, 6, 7,8].
NOTE:
Loosen the screws in the order of the callout numbers [1, 2, 3, 4,5, 6, 7,8]. These screws are
retention screws and cannot be fully removed.
b Remove the heat sink from the system board [ 9].
Installing the heat sink
1
Align the screws on the heat sink with the screw holders on the system board.
2
Tighten the captive screws to secure it to the system board.
NOTE:
Secure the screws in the order of the callout numbers [1, 2, 3, 4, 5, 6, 7, 8].
3
Install the:
a
b
c
d
4
After working inside your computer
.
24
Removing and installing components
