Dell USC, Руководство пользователя

Страница: 85 / 132

USC and USC-LCE Operations
85
Workflow
NOTE:
All virtual disks created under the same physical disk are automatically
encrypted.
To encrypt the unsecure virtual disks:
1 In the left pane, click Hardware Configuration .
2 In the right pane, click Configuration Wizards and click Key Encryption .
3 Select the controller that is encrypted and click Next .
NOTE:
The encryption mode (Local Key Encryption) applied to the selected
controller does not change.
4 Select Encrypt unsecure virtual disks and click Next .
5 To enable encryption, select the unsecure virtual disks and click Finish .
Applying the Local Key on the RAID Controller
Prerequisites
• The controller must be security capable.
Workflow
To apply the local key on the RAID controller:
1 In the left pane, click Hardware Configuration .
2 In the right pane, click Configuration Wizards and click Key Encryption .
3 Select the controller to apply a local key and click Next .
4 Click Set up local key encryption and click Next .
NOTE:
Some controller options are disabled if they do not support encryption.