Dell USC Скачать руководство пользователя страница 73

Страница: 73 / 132

USC and USC-LCE Operations

Select the Express Wizard

The

Express Wizard

enables you to select the RAID level only. The

Express

Wizard

then selects a virtual disk configuration for the user which

implements the selected RAID level and optionally enables you to assign a

hot spare. Select

Express Wizard

to quickly create a virtual disk using

recommended settings. This wizard is not available on all controllers.

NOTE:

If the available physical disks are using both Serial Attached

SCSI (SAS) and Serial ATA (SATA) protocols, it is recommended that you use

the Advanced Wizard.

Select Advanced Wizard

The

Advanced Wizard

enables you to specify which protocol is used when

creating the disk pool for the virtual disks. A disk pool is a logical grouping of

disks attached to a RAID controller on which one or more virtual disks can be

created. In addition to the RAID level, the

Advanced Wizard

allows more

flexibility with physical disk selection, span configuration, cache policy, and

other virtual disk attributes. Select

Advanced Wizard

to specify all virtual disk

settings.

NOTE:

It is recommended that you have a good knowledge of RAID and your

hardware configuration to use the Advanced Wizard.

Click

Next

after making the selection.

Select Basic Settings

Select the RAID type for the virtual disk from the

RAID Level

drop-down menu:

•

RAID 0

— Stripes data across the physical disks. RAID 0 does not

maintain redundant data. When a physical disk fails in a RAID 0 virtual

disk, there is no method for rebuilding the data. RAID 0 offers good read

and write performance with 0 data redundancy.

•

RAID 1

— Mirrors or duplicates data from one physical disk to another.

If a physical disk fails, data can be rebuilt using the data from the other

side of the mirror. RAID 1 offers good read performance and average write

performance with good data redundancy.

•

RAID 5

— Stripes data across the physical disks, and uses parity

information to maintain redundant data. If a physical disk fails, the data

can be rebuilt using the parity information. RAID 5 offers good read

performance and slower write performance with good data redundancy.

Содержание USC





































































































































Результаты поиска

Содержание USC

Отзывы:

Dell USC, Руководство пользователя, Страница: 73 / 132

Результаты поиска

Содержание USC

Отзывы: