Dell USC Скачать руководство пользователя страница 30

Страница: 30 / 132

USC and USC-LCE Features

See Also:

•

Viewing Hardware Inventory–Current or Factory Shipped

•

Exporting Hardware Inventory–Current or Factory Shipped

Delete Configuration and Reset Defaults

You can delete the current iDRAC settings and reset iDRAC to factory

defaults. It also deletes lifecycle logs and the factory shipped inventory

information on the managed node. For more information, see

Deleting

Configuration and Resetting Defaults

Operating System Deployment

Driver Access

For USC

USC does not provide local drivers repository or does not support single Dell

Update Package (DUP.) Use one of the following options to access the driver

packages:

• ftp.dell.com
• Local FTP
• USB device
•

Dell Systems Build and Update Utility

DVD

For USC-LCE

USC-LCE provides a local repository for drivers that are required for

operating system installation. Based on the operating system being installed,

the

OS Deployment

wizard extracts these drivers and copies them to a

staging directory.

NOTE:

Although, USC-LCE has embedded drivers that are factory installed, there

may be latest drivers available. Before installing the operating system, run the

Platform Update wizard to ensure that the latest drivers are available. See

Updating

Platform

for more information.

Содержание USC





































































































































Результаты поиска

Содержание USC

Отзывы:

Dell USC, Руководство пользователя, Страница: 30 / 132

Результаты поиска

Содержание USC

Отзывы: