Dell Studio 1557 Скачать руководство пользователя страница 17

Страница: 17 / 49

Follow the instructions in

Before You Begin

Remove the display assembly (see

Removing the Display Assembly

Gently push the display bezel outwards on each of the four sides to release the bezel from the display panel.

Replacing the Display Bezel

Follow the instructions in

Before You Begin

Starting at any corner, use your fingers to gently snap the bezel into place to secure it to the display panel.

Replace the display assembly (see

Replacing the Display Assembly

Display Panel

Removing the Display Panel

Follow the instructions in

Before You Begin

Remove the display assembly (see

Removing the Display Assembly

Remove the display bezel (see

Removing the Display Bezel

Remove the four screws that secure the display panel to the display cover.

Using the camera cable pull-tab, disconnect the camera cable from the connector on the camera.

WARNING:

The following instructions are not applicable to Edge-to-Edge display panels, which should not be disassembled.

CAUTION:

Removal of the bezel from the display bottom cover requires extreme care to avoid damage to the bezel and the display panel.

1 display bezel

NOTE:

In some computers, the display bezel has a double-sided tape on both ends. To avoid damage to the display bezel, remove the display bezel

carefully to free it from the double-sided tape.

Содержание Studio 1557


















































Результаты поиска

Содержание Studio 1557

Отзывы:

Похожие инструкции для Studio 1557

Бренды по названию

Популярные бренды

Dell Studio 1557, Руководство по обслуживанию

Результаты поиска

Содержание Studio 1557

Отзывы:

Похожие инструкции для Studio 1557

Бренды по названию

Популярные бренды