Dell Storage Center SC200, Руководство по обслуживанию

Страница: 17 / 36

Replacing Hard Drives
Dell Compellent 13
9
In the Storage Center System Manager, make sure that the replacement power supply
is recognized and shown as up and running.
10
Perform a Phone Home and contact Dell Technical Support Services as described on
page 24 .
Replacing Hard Drives
The SC200 and SC220 enclosures support hot-swappable hard drives. The SC200
enclosure supports up to 12 3.5-inch hard drives installed in a four-column, three-row
configuration. The SC220 enclosure supports up to 24 2.5-inch hard drives installed
vertically side-by-side. Hard drives are connected to a backplane through hard drive
carriers. Hard drive blanks are installed in the hard drive bays that are not occupied.
Hard Drive Numbering
Hard drives are numbered on the enclosure.
SC200 hard drives are numbered 0-11, from left to right and top to bottom, starting with 0
on the upper left side.
SC220 hard drives are numbered 0-23, left to right.
Identifying the Failed Hard Drive
To determine which hard drive failed, use the Storage Center System Manager.
1
In the System Tree, expand the
Enclosures
entry.
2
Expand the failed enclosure entry (indicated with a red dot).
3
Click
Disks
. The status of each hard drive is displayed.
4
To see the location of the failed hard drive, expand the
Disks
entry, and click on the
failed hard drive entry to display a front view of the enclosure.
Note:
Allow several seconds for the enclosure to recognize the power supply/
cooling fan module and determine its status. When functioning properly, the
power supply/cooling fan module’s AC power LED turns green and the power
supply/cooling fan LED is off. In addition, the power supply status indicator turns
green in the Storage Center System Manager.
Table 1. SC200 Hard Drive Numbering
0 1 2 3
4 5 6 7
8 9 10 11
Table 2. SC220 Hard Drive Numbering
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23