Dell SE2422HXB Скачать руководство пользователя страница 1

Страница: 1 / 6

DELL SE2422HXB

1. Disassembly Procedures

Turn off the monitor.

To remove the stand:

Place a flat cushion or a sitting mat near
the edge of a table and place the
monitor on it with the display facing
down.

Press the stand down to access to the
Stand release button.

Use a long screwdriver to press the
release latch.

While pressing the release latch, slide
out the stand assembly from the monitor

To remove the VESA cover

Press the dimple on the VESA cover to
release it from the back of the display

Unlock 4 RC screws

(Screw Torque: 8.5±1.0kgf)

Unlock 2 Bracket screws

(Screw Torque: 5.0±1.0kgf)

Содержание SE2422HXB

Страница 2: ...part 3 Disassemble the Bottom part 4 Remove Rear Cover from Bezel S7 Disassemble CTRL BD FFC from I F BD and tear off CTRL BD FFC from Main SHD and Panel Disassemble LVDS cable from panel S8 Remove 1 tape from Backlight Wire S9 Disassemble Backlight Wire from panel and SPS BD S10 Remove 2 tapes from Main SHD to take off Main SHD from Panel ...

Страница 3: ...mble CTRL BD from Bezel S13 Disassemble Mylar from Main SHD S14 Unlock 2 hex screws Screw Torque 5 0 0 6kgf S15 Unlock 5 PCBA screws Screw Torque 8 5 1 0kgf S16 Disassemble SPS BD and I F BD from Main SHD Remove SPS wire from I F BD Remove LVDS cable from I F BD ...

Страница 4: ... SE2422HXB S17 Remove electrolyte capacitors red mark from printed circuit boards S17 1 Cut the glue between bulk cap and PCB with a knife S17 2 Ensure cutting path within the glue don t touch bulk cap or PCB ...

Страница 5: ...5 DELL SE2422HXB S17 3 Take out bulk cap pin solder with soldering iron and absorber S18 4 Lift the bulk cap up and away from the PCB ...