Version
Description
9.8(0.0P5)
Introduced on the S4048-ON.
9.8(0.0P2)
Introduced on the S3048-ON.
9.7(0.0)
Introduced on the S6000-ON.
9.5(0.1)
Introduced on the Z9500.
9.0.2.0
Introduced on the S6000.
8.3.19.0
Introduced on the S4820T.
8.3.12.0
Introduced on the S4810.
8.3.11.1
Introduced on the Z9000.
7.5.1.0
Introduced on the E-Series.
Usage Information
Dell Networking recommends configuring metrics on all interfaces. Without configuring this command, the IS-IS
metrics are similar to hop-count metrics.
isis metric
Assign a metric to an interface.
Syntax
isis metric
default-metric
[level-1 | level-2]
To return to the default values, use the
no isis metric [
default-metric
] [level-1 | level-2]
command.
Parameters
default-metric
Metric assigned to the link and used to calculate the cost from each other router via the
links in the network to other destinations. You can configure this metric for Level 1 or
Level 2 routing. The range is from 0 to 16777215 irrespective of the metric style. The
default is
10
.
If metric value is configured to more than 63, system throughs the following
warning:
Warning: for metrics greater than 63, 'metric-style
wide' should be configured on level-1-2, or it will be capped
at 63.
If the metric style is WIDE, the metric values that are greater than 63 are only effective.
level-1
(OPTIONAL) Enter the keywords
level-1
to configure the shortest path first (SPF)
calculation for Level 1 (intra-area) routing. This setting is the default.
level-2
(OPTIONAL) Enter the keywords
level-2
to configure the SPF calculation for Level 2
(inter-area) routing.
Defaults
default-metric =
10
;
level-1
(if not otherwise specified)
Command Modes
INTERFACE
Command History
This guide is platform-specific. For command information about other platforms, see the relevant
Dell Networking
OS Command Line Reference Guide
.
868
Intermediate System to Intermediate System (IS-IS)
Содержание S6100
Страница 1: ...Dell Command Line Reference Guide for the S6100 ON System 9 11 2 0P1 ...
Страница 474: ...protocol list ttl0 ttl1 Dell 474 Control Plane Policing CoPP ...
Страница 979: ... show lldp neighbors display the LLDP neighbors Link Layer Discovery Protocol LLDP 979 ...
Страница 1627: ... uplink state group creates an uplink state group and enables the tracking of upstream links Uplink Failure Detection UFD 1627 ...