Dell S6100, Руководство по настройке

Страница: 867 / 1743

Version Description
9.10(0.0) Introduced on the S6100–ON.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.5(0.1) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.12.0 Introduced on the S4810.
8.3.11.1 Introduced on the Z9000.
Usage Information
Hello PDUs are “padded” only when both the global and interface padding options are ON. Turning either one OFF
disables padding for the corresponding interface.
Related Commands
• hello padding — turn ON or OFF padding for LAN and point-to-point hello PDUs.
isis ipv6 metric
Assign metric to an interface for use with IPv6 information.
Syntax isis ipv6 metric default-metric [level-1 | level-2]
To return to the default values, use the
no ipv6 isis metric [ default-metric ] [level-1 |
level-2]
command.
Parameters
default-metric Metric assigned to the link and used to calculate the cost from each other router via the
links in the network to other destinations. You can configure this metric for Level 1 or
Level 2 routing. The range is from 0 to 16777215. The default is
10 .
level-1 (OPTIONAL) Enter the keywords
level-1
to configure the shortest path first (SPF)
calculation for Level 1 (intra-area) routing. This value is the default.
level-2 (OPTIONAL) Enter the keywords
level-2
to configure the SPF calculation for Level 2
(inter-area) routing.
Defaults default-metric = 10 ; level-1 (if not otherwise specified)
Command Modes INTERFACE
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide .
Version Description
9.10(0.0) Introduced on the S6100–ON.
9.8(1.0) Introduced on the Z9100–ON.
Intermediate System to Intermediate System (IS-IS) 867