Dell S6100, Руководство по настройке

Страница: 762 / 1743

Version Description
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
8.1.1.0 Introduced on the E-Series.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
Usage Information To configure a list of possible domain names, configure the
ip domain-list
command up to six times.
If you configure both the
ip domain-name
and
ip domain-list
commands, the software tries to resolve
the name using the
ip domain-name
command. If the name is not resolved, the software goes through the list
of names configured with the
ip domain-list
command to find a match.
To enable dynamic resolution of hosts, use the following steps:
• specify a domain name server with the ip name-server command
• enable DNS with the
ip domain-lookup
command
To view current bindings, use the
show hosts
command. To view a DNS-related configuration, use the
show
running-config resolve
command.
Related Commands
• ip domain-name — specify a DNS server.
ip domain-lookup
To address resolution (that is, DNS), enable dynamic host-name.
Syntax ip domain-lookup
To disable DNS lookup, use the
no ip domain-lookup
command.
Defaults Disabled.
Command Modes CONFIGURATION
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide .
Version Description
9.10(0.0) Introduced on the S6100–ON.
9.8(1.0) Introduced on the Z9100–ON.
762 IPv4 Routing