Dell S6100, Руководство по настройке

Страница: 744 / 1743

arp backoff-time
Set the exponential timer for resending unresolved ARPs.
Syntax arp backoff-time seconds
Parameters
seconds Enter the number of seconds an ARP entry is black-holed. The range is from 1 to 3600.
The default is
30 .
Defaults 30
Command Mode CONFIGURATION
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide .
Version Description
9.10(0.0) Introduced on the S6100–ON.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.8.0 Introduced on the S4810.
Usage Information This timer is an exponential backoff timer. Over the specified period, the time between ARP requests increases.
This behavior reduces the potential for the system to slow down while waiting for a multitude of ARP responses.
Related Commands
• show arp retries — display the configured number of ARP retries.
arp learn-enable
Enable ARP learning using gratuitous ARP.
Syntax arp learn-enable
744 IPv4 Routing