Dell S6100, Руководство по настройке

Страница: 400 / 1743

The
neighbor shutdown
command terminates all BGP sessions on the BGP neighbor or BGP peer group. Use
this command with caution as it terminates the specified BGP sessions. When a neighbor or peer group is shut
down, use the
show ip bgp summary command to confirm its status.
Related Commands
• show ip bgp summary — display the current BGP configuration.
• show ip bgp neighbors — display the current BGP neighbors.
neighbor soft-reconfiguration inbound
Enable soft-reconfiguration for BGP.
Syntax neighbor { ip-address | peer-group-name } soft-reconfiguration inbound
To disable, use the no neighbor { ip-address | peer-group-name } soft-reconfiguration
inbound
command.
Parameters
ip-address Enter the IP address of the neighbor in dotted decimal format.
peer-group-name Enter the name of the peer group to disable or enable all routers within the peer group.
Defaults Disabled
Command Modes ROUTER BGP
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide .
Version Description
9.10(0.0) Introduced on the S6100-ON.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000–ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.8.1.0 Introduced on the S-Series.
7.7.1.0 Introduced on the C-Series.
7.4.1.0 Introduced.
Usage Information
This command enables soft-reconfiguration for the BGP neighbor specified. BGP stores all the updates the
neighbor receives but does not reset the peer-session.
400 Border Gateway Protocol