Dell S6100, Руководство по настройке

Страница: 389 / 1743

Version Description
7.8.1.0 Introduced on the S-Series.
7.7.1.0 Introduced on the C-Series.
Usage Information If you configure the
neighbor maximum-prefix
command and the neighbor receives more prefixes than the
neighbor maximum-prefix
command configuration allows, the neighbor goes down and the
show ip bgp
summary
command displays (prfxd) in the State/PfxRcd column for that neighbor. The neighbor remains down
until you enter the
clear ip bgp
command for the neighbor or the peer group to which the neighbor belongs
or you enter the
neighbor shutdown
and
neighbor no shutdown
commands.
Related Commands
• show ip bgp summary — display the current BGP configuration.
neighbor password
Enable message digest 5 (MD5) authentication on the TCP connection between two neighbors.
Syntax neighbor { ip-address | peer-group-name } password [ encryption-type ] password
To delete a password, use the
no neighbor { ip-address | peer-group-name } password
command.
Parameters
ip-address Enter the IP address of the router to be included in the peer group.
peer-group-name Enter the name of a configured peer group.
encryption-type (OPTIONAL) Enter
7
as the encryption type for the password entered.
7
means that the
password is encrypted and hidden.
password
Enter a text string up to 80 characters long. The first character of the password must be
a letter.
You cannot use spaces in the password.
Defaults Not configured.
Command Modes ROUTER BGP
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide .
Version Description
9.10(0.0) Introduced on the S6100-ON.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000–ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
Border Gateway Protocol 389