Dell S6100, Руководство по настройке

Страница: 385 / 1743

Usage Information Other BGP filtering commands include:
neighbor filter-list
,
ip as-path access-list
, and
neighbor route-map
.
Related Commands
• neighbor route-map — assign a route map to a neighbor or peer group.
neighbor ebgp-multihop
Attempt and accept BGP connections to external peers on networks that are not directly connected.
Syntax neighbor { ip-address | peer-group-name } ebgp-multihop [ ttl ]
To disallow and disconnect connections, use the
no neighbor { ip-address | peer-group-name }
ebgp-multihop
command.
Parameters
ip-address Enter the IP address of the neighbor in dotted decimal format.
peer-group-name Enter the name of the peer group.
ttl (OPTIONAL) Enter the number of hops as the Time to Live (ttl) value. The range is from 1
to 255. The default is
255 .
Defaults Disabled.
Command Modes ROUTER BGP
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide .
Version Description
9.10(0.0) Introduced on the S6100–ON.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000–ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.8.1.0 Introduced on the S-Series.
7.7.1.0 Introduced on the C-Series.
Usage Information To prevent loops, the
neighbor ebgp-multihop
command does not install the default routes of the multihop
peer. Networks not directly connected are not considered valid for best-path selection.
Border Gateway Protocol 385