Dell S6100, Руководство по настройке

Страница: 376 / 1743

Command Modes ROUTER BGP
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide .
Version Description
9.10(0.0) Introduced on the S6100-ON.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000–ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.8.1.0 Introduced on the S-Series.
7.7.1.0 Introduced on the C-Series.
pre-7.7.1.0 Introduced.
Related Commands
• router bgp — enter ROUTER mode on the switch.
maximum-paths
Configure the maximum number of parallel routes (multipath support) BGP supports.
Syntax maximum-paths {ebgp | ibgp} number
To return to the default values, enter the
no maximum-paths
command.
Parameters
ebgp Enter the keyword
ebgp
to enable multipath support for External BGP routes.
ibgp Enter the keyword
ibgp
to enable multipath support for Internal BGP routes.
number Enter a number as the maximum number of parallel paths.
Defaults none
Command Modes ROUTER BGP
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide .
376 Border Gateway Protocol