Dell S6100, Руководство по настройке

Страница: 236 / 1743

Parameters
ipv4 | ipv6 | mac Enter the keyword
ipv4, ipv6
or
mac
to identify the access list type to resequence.
access-list-name Enter the name of a configured IP access list, up to 140 characters. Increased name string
to accept up to 140 characters. Prior to version 7.8.1.0, names are up to 16 characters long.
StartingSeqNum Enter the starting sequence number to resequence. The range is 0 to 4294967290.
Step-to-Increment Enter the step to increment the sequence number. The range is 1 to 4294967290.
Defaults none
Command Modes
• EXEC
• EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide .
Version Description
9.10(0.0) Introduced on the S6100–ON.
9.8(1.0) Introduced on the Z9100–ON.
9.0.2.0 Introduced on the S6000.
8.4.2.0 Introduced on the S-Series.
8.2.1.0 Introduced on the E-Series ExaScale.
7.8.1.0 Introduced on the C-Series.
7.4.1.0 Introduced on the E-Series TeraScale.
Usage Information When all sequence numbers have been exhausted, this feature permits re-assigning new sequence number to
entries of an existing access-list.
seq
Assign a sequence number to a deny or permit the filter in an IPv6 access list while creating the filter.
Syntax seq sequence-number {deny | permit} { ipv6-protocol-number | icmp | ip | tcp |
udp} { source address mask | any | host ipv6-address } { destination address | any
| host ipv6-address } [ operator port [ port ]] [count [byte]] | [log] [monitor]
To delete a filter, use the
no seq sequence-number
command.
Parameters
sequence-number Enter a number from 0 to 4294967290.
deny Enter the keyword
deny
to configure a filter to drop packets meeting this condition.
permit Enter the keyword
permit
to configure a filter to forward packets meeting this criteria.
ipv6-protocol-
number Enter an IPv6 protocol number. The range is 0 to 255.
236 Access Control Lists (ACL)