Dell S6100, Руководство по настройке

Страница: 1727 / 1743

• For a Port Channel interface, enter the keywords
port-channel
, and then a
number.
• For a VLAN interface, enter the keyword
vlan
, and then the VLAN ID. The VLAN ID
range is from 1 to 4094.
vrid (OPTIONAL) Enter a number from 1 to 255 as the VRRP group ID.
all Enter the keyword
all
to enable debugging of all VRRP groups.
bfd Enter the keyword
bfd
to enable debugging of all VFFP BFD interactions.
database Enter the keyword
database
to display changes related to group, prefix, and interface
entries in the VRRP table.
packets Enter the keyword
packets
to enable debugging of VRRP control packets.
state Enter the keyword
state
to enable debugging of VRRP state changes.
timer Enter the keyword timer to enable debugging of the VRRP timer.
Command Modes EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide .
Version Description
9.10(0.0) Introduced on the S6100–ON.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.10.0 Introduced on the S4810.
8.4.1.0 Introduced on E-Series, C-Series, and S-Series. Support was added for IPv6 VRRP
groups in nondefault VRF instances.
8.3.2.0 Introduced on the E-Series.
Usage Information If you do not specify an option, debugging is active on all interfaces and all VRRP groups.
show vrrp ipv6
View the active IPv6 VRRP groups. If no VRRP groups are active, the Dell Networking OS returns
No Active VRRP group
.
Syntax show vrrp ipv6 [ vrid ] [ interface ] [brief] [vrf vrf-name ]
Parameters
vrid (OPTIONAL) Enter the virtual router identifier for the VRRP group to view only that
group. The range is from 1 to 255.
interface Enter the following keywords and the number information:
Virtual Router Redundancy Protocol (VRRP) 1727