•
EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms, refer to the relevant
Dell
Networking OS Command Line Reference Guide
.
Version
Description
9.11(0.0)
Introduced the static mode on the S4048–ON, S4048T-ON, S6000–ON, S6010–ON,
S6100–ON, and Z9100–ON.
9.10(0.0)
Introduced on the S6100–ON.
9.8(1.0)
Introduced on the Z9100–ON.
9.8(0.0)
Introduced on the S4048–ON.
9.7(0.0)
Introduced on the S6000-ON.
9.4.(0.0)
Introduced on the S6000.
Example
Dell# show vxlan vxlan-instance <1> unicast-mac-local
Total Local Mac Count: 5
VNI MAC PORT VLAN
4656 00:00:02:00:03:00 Te 1/1/7/1 0
4656 00:00:02:00:03:01 Te 1/1/7/1 0
4656 00:00:02:00:03:02 Te 1/1/7/1 0
4656 00:00:02:00:03:03 Te 1/1/7/1 0
4656 00:00:02:00:03:04 Te 1/1/7/1 0
Related Commands
- Enable VXLAN Instance configuration on the platform.
show vxlan vxlan-instance unicast-mac-remote
Displays the information of the remote unicast MACs associated with the logical network related to Network Virtualization Overlay (NVO)
Gateway.
Syntax
show vxlan vxlan-instance
instance ID
unicast-mac-remote [logical-network
name
| vnid
VNID
]
Parameters
instance ID
Enter the VXLAN instance ID. The platform supports only the instance ID
1
in the initial
release.
name
(Optional) Enter the name of VXLAN logical network with a maximum length of 30
characters.
vnid
VNID
(Optional) Enter the keyword
vnid
and then enter the ID of the VXLAN. The range is
from 1 to 16777215.
Command Modes
•
EXEC
•
EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms, refer to the relevant
Dell
Networking OS Command Line Reference Guide
.
Virtual Extensible LAN (VXLAN)
1705
Содержание S6100
Страница 1: ...Dell Command Line Reference Guide for the S6100 ON System 9 11 2 0P1 ...
Страница 474: ...protocol list ttl0 ttl1 Dell 474 Control Plane Policing CoPP ...
Страница 979: ... show lldp neighbors display the LLDP neighbors Link Layer Discovery Protocol LLDP 979 ...
Страница 1627: ... uplink state group creates an uplink state group and enables the tracking of upstream links Uplink Failure Detection UFD 1627 ...