Dell S6100, Руководство по настройке

Страница: 167 / 1743

Version Description
8.3.12.0 Introduced on the S4810.
8.3.11.1 Introduced on the Z9000.
7.6.1.0 Introduced on the C-Series and S-Series.
7.4.1.0 Introduced on the E-Series.
Usage Information The authenticator completes authentication only when you set
port-control
to
auto
.
dot1x profile
Configure a dot1x profile to define a list of trusted supplicant MAC addresses.
Syntax [no] dot1x profile profile-name
Parameters
profile-name Enter a dot1x
profile-name
. The profile name length is limited to 32 characters.
Defaults None
Command Modes
CONFIGURATION
CONFIGURATION TERMINAL BATCH
Error Strings NONE
Command History
This guide is platform-specific. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide .
Version Description
9.10(0.0) Introduced on the S3100 series, S4048–ON, S4048–ON, S4810, S4820T, S5000, S6000,
S6000–ON, S6100–ON, the Configuration Terminal Batch mode on C9010, Z9100–ON,
and Z9500.
9.9(0.0) Introduced on the C9010.
Usage Information
The
dot1x profile
command configures a dot1x profile to define a list of trusted supplicant MAC addresses.
Maximum number of dot1x profiles is limited to 10. This command launches dot1x profile mode for entering profile
related commands such as the mac command. The dot1x static-mab command assigns the dot1x profile to
an interface.
Use this command in Configuration Terminal Batch mode to configure the dot1x profile in a dual-homing setup.
Related Commands
• dot1x static-mab
• mac
802.1X 167