Dell S6100, Руководство по настройке

Страница: 1562 / 1743

Usage Information Unknown Unicast Storm-Control is valid for Layer 2 and Layer 2/Layer 3 interfaces.
storm-control unknown-unicast (Interface)
Configure percentage of unknown-unicast traffic allowed on an interface (ingress only).
Syntax storm-control unknown-unicast [ percentage decimal_value in] | [wred-profile
name]] [ packets_per_second in]
To disable unknown-unicast storm control on the interface, use the
no storm-control unknown-unicast
[ percentage decimal_value in] | [wred-profile name]] [ packets_per_second in]
command.
Parameters
percentage
decimal_value
[in |
out]
E-Series Only: Enter the percentage of broadcast traffic allowed in or out of the network.
Optionally, you can designate a decimal value percentage, for example, 55.5%.
The percentage is from 0 to 100:
• 0% blocks all related traffic.
• 100% allows all traffic into the interface.
The decimal range is from 0.1 to 0.9.
wred-profile name E-Series Only: (Optionally) Enter the keywords
wred-profile
followed by the profile
name to designate a wred-profile.
packets_per_secon
d
in
C-Series and S-Series Only: Enter the packets per second of broadcast traffic allowed
into the network. The range is from 0 to 33554431.
Defaults none
Command Modes INTERFACE (conf-if- interface-slot/port )
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide .
Version Description
9.10(0.0) Introduced on the S6100–ON.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.6.1.0 Introduced on the S-Series.
1562 Storm Control