Dell S6100, Руководство по настройке

Страница: 1413 / 1743

RADIUS groups and VRFs have one-to-one mapping. If a VRF is configured with one RADIUS group, then you
cannot use the same VRF with another RADIUS group. When the VRF is removed, then the corresponding
RADIUS group is also removed automatically.
Example
Dell(conf)#radius-server group group1
Dell(conf-radius-group)#radius-server vrf vrf1 source-interface
tengigabitethernet 1/1/3/1
Dell(conf)#radius-server group group2
Dell(conf-radius-group)#radius-server vrf default
radius-server key
Configure a key for all RADIUS communications between the switch and the RADIUS host server.
Syntax radius-server key [ encryption-type ] key
To delete a password, use the
no radius-server key
command.
Parameters
encryption-type (OPTIONAL) Enter either zero (
0
) or
7
as the encryption type for the key entered. The
options are:
•
0
is the default and means the key is not encrypted and stored as clear text.
•
7
means that the key is encrypted and hidden.
key Enter a string that is the key to be exchanged between the switch and RADIUS servers. It
can be up to 42 characters long.
Defaults Not configured.
Command Modes CONFIGURATION
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide .
Version Description
9.10(0.0) Introduced on the S6100-ON.
9.8(1.0) Introduced on the Z9100-ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000–ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.7.1.0 Authentication key length increased to 42 characters.
Security 1413