Dell S6100, Руководство по настройке

Страница: 1365 / 1743

Version Description
6.2.1.1 Introduced on the E-Series.
Related Commands
• protocol spanning-tree rstp — enters SPANNING TREE mode on the switch.
forward-delay
Configure the amount of time the interface waits in the Listening State and the Learning State before transitioning to the Forwarding State.
Syntax forward-delay seconds
To return to the default setting, use the
no forward-delay
command.
Parameters
seconds Enter the number of seconds that Dell Networking OS waits before transitioning RSTP to
the forwarding state. The range is from 4 to 30. The default is
15 seconds .
Defaults 15 seconds
Command Modes CONFIGURATION RSTP (conf-rstp)
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide .
Version Description
9.10(0.0) Introduced on the S6100-ON.
9.8(1.0) Introduced on the Z9100-ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
6.2.1.1 Introduced on the E-Series.
Related Commands
• hello-time — changes the time interval between BPDUs.
• max-age — changes the wait time before RSTP refreshes the protocol configuration information.
Rapid Spanning Tree Protocol (RSTP) 1365