Dell S6100, Руководство по настройке

Страница: 1284 / 1743

layer2 (OPTIONAL) Enter the keyword
layer2
to specify a Layer 2 Class Map. The default is
Layer 3 .
Defaults Layer 3
Command Modes INTERFACE
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide .
Version Description
9.10(0.0) Introduced on the S6100-ON.
9.8(1.0) Introduced on the Z9100-ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
7.4.1.0 E-Series Only: Expanded to add support for Layer 2.
6.1.1.1 Introduced on the E-Series.
Usage Information You can attach a single policy-map to one or more interfaces to specify the service-policy for those interfaces. A
policy map attached to an interface can be modified.
NOTE: The
service-policy
commands are not allowed on a port channel. The
service-policy
input policy-map-name
command and the
service-class dynamic dot1p
command are not
allowed simultaneously on an interface. However, the service-policy input command (without the
policy-map-name option) and the service-class dynamic dot1p command are allowed on an interface.
Related Commands
• policy-map-input — creates an input policy map.
service-policy output
Apply an output policy map to the selected interface.
Syntax service-policy output policy-map-name
1284 Quality of Service (QoS)