Dell S6100, Руководство по настройке

Страница: 1167 / 1743

ipv6 ospf hello-interval
Specify the time interval between the hello packets sent on the interface.
Syntax ipv6 ospf hello—interval seconds
To return to the default time interval, enter
no ipv6 ospf hello—interval
.
Parameters
seconds
Enter the time interval in seconds as the time between hello packets. The range is from 1
to 65525 seconds.
Defaults 10 seconds (Ethernet).
Command Modes INTERFACE
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide .
Version Description
9.10(0.0) Introduced on the S6100-ON.
9.8(1.0) Introduced on the Z9100-ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.2(1.0) Introduced on the Z9500.
9.1.(0.0) Introduced on the S4810 and Z9000.
7.8.1.0 Added support for the C-Series.
7.4.1.0 Introduced on the E-Series.
8.3.19.0 Introduced on the S4820T.
Usage Information
The time interval between hello packets must be the same for routers in a network.
Related Commands
• ipv6 ospf dead-interval – specify the time interval between hello packets was received from a router.
Open Shortest Path First (OSPFv2 and OSPFv3) 1167