Dell S6100, Руководство по настройке

Страница: 1108 / 1743

Version Description
7.8.1.0 Added support for Multi-Process OSPF.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
7.4.1.0 Added the keyword
default
.
pre- 6.1.1.1 Introduced on the E-Series.
redistribute isis
Redistribute IS-IS routing information throughout the OSPF instance.
Syntax redistribute isis [ tag ] [level-1 | level-1-2 | level-2] [metric metric-value |
metric-type type-value ] [route-map map-name ] [tag tag-value ]
To disable redistribution, use the
no redistribute isis [ tag ] [level-1 | level-1-2 |
level-2] [metric metric-value | metric-type type-value ] [route-map map-name ]
[tag tag-value ]
command.
Parameters
tag (OPTIONAL) Enter the name of the IS-IS routing process.
level-1 (OPTIONAL) Enter the keywords
level-1
to redistribute only IS-IS Level-1 routes.
level-1-2 (OPTIONAL) Enter the keywords
level-1-2
to redistribute both IS-IS Level-1 and
Level-2 routes.
level-2 (OPTIONAL) Enter the keywords
level-2
to redistribute only IS-IS Level-2 routes.
metric metric-value (OPTIONAL) Enter the keyword
metric
then a number. The range is from 0 (zero) to
4294967295.
metric-type type-
value
(OPTIONAL) Enter the keywords metric-type then one of the following:
• 1 = for OSPF External type 1
• 2 = for OSPF External type 2
route-map map-
name
(OPTIONAL) Enter the keywords
route-map
then the name of the route map.
tag tag-value (OPTIONAL) Enter the keyword
tag
to set the tag for routes redistributed into OSPF.
The range is from 0 to 4294967295.
Defaults Not configured.
Command Modes ROUTER OSPF
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide .
1108 Open Shortest Path First (OSPFv2 and OSPFv3)