Dell S5840cdn Скачать руководство пользователя страница 87

Страница: 87 / 113

Action

Yes

Step 5

Check if the cables connecting the printer and the computer are
inserted in the correct ports.

Are the cables inserted in the correct ports?

Go to step 6.

Make sure to match
the following:

•

The USB cable
with the USB port
on the printer

•

The Ethernet
cable with the
Ethernet port on
the printer

Step 6

Turn off the printer, reinstall the hardware options, and then turn it
back on.

For more information, see the documentation that came with the
option.

Is the printer responding?

The problem is
solved

Go to step 7.

Step 7

Install the correct print driver.

Is the printer responding?

The problem is
solved

Go to step 8.

Step 8

Turn off the printer, wait for about 10 seconds, and then turn it back
on.

Is the printer responding?

The problem is
solved.

Contact

technical

support

Job prints from the wrong tray or on the wrong paper

Action

Yes

Step 1

Check if you are printing on a supported paper.

Print the document.

Is the document printed from the correct tray or on the correct
paper?

The problem is
solved.

Go to step 2.

Troubleshooting

Содержание S5840cdn


















































































































Результаты поиска

Содержание S5840cdn

Отзывы:

Бренды по названию

Популярные бренды

Dell S5840cdn, Руководство пользователя

Результаты поиска

Содержание S5840cdn

Отзывы:

Бренды по названию

Популярные бренды