Dell S5830DN Скачать руководство пользователя страница 31

Страница: 31 / 232

Holding the card by its sides, align the plastic pins (1) on the card with the holes (2) on the controller board.

Push the card ﬁrmly into place as shown in the illustration.

Warning—Potential Damage:

Improper installation of the card may cause damage to the card and the

controller board.

Note:

The entire length of the connector on the card must touch and be ﬂushed against the controller

board.

Close the controller board access door.

Note:

When the printer software and any hardware options are installed, it may be necessary to manually

add the options in the printer driver to make them available for print jobs. For more information, see

“Adding available options in the print driver” on page 41

Installing a printer hard disk

Note:

This task requires a ﬂat

‑

head screwdriver.

Additional printer setup

Содержание S5830DN









































































































































































































































Результаты поиска

Содержание S5830DN

Отзывы:

Бренды по названию

Популярные бренды

Dell S5830DN, Руководство пользователя

Результаты поиска

Содержание S5830DN

Отзывы:

Бренды по названию

Популярные бренды