Dell S5830DN Скачать руководство пользователя страница 187

Страница: 187 / 232

Unformatted ﬂash detected [53]

Try one or more of the following:

•

From the printer control panel, touch

Continue

to stop the defragmentation and continue printing.

•

Format the ﬂash memory.

Note:

If the error message remains, then the ﬂash memory may be defective and needs to be

replaced.

Unsupported disk

An unsupported disk has been inserted. Remove the unsupported disk, and then install a supported one.

Unsupported option in slot [x] [55]

Turn off the printer.

Unplug the power cord from the electrical outlet.

Remove the unsupported option card from the printer controller board, and then replace it with a
supported card.

Connect the power cord to a properly grounded electrical outlet.

Turn the printer back on.

USB port [x] disabled [56]

Try one or more of the following:

•

From the printer control panel, select

Continue

to clear the message and continue printing.

The printer discards any data received through the speciﬁed serial port.

•

Select

Reset active bin

to reset the active bin for a linked set of bins.

•

Make sure the USB Buffer menu is enabled.

Solving printer problems

•

“Basic printer problems” on page 188

•

“Hardware and internal option problems” on page 189

•

“Paper feed problems” on page 194

Troubleshooting

187

Содержание S5830DN









































































































































































































































Результаты поиска

Содержание S5830DN

Отзывы:

Бренды по названию

Популярные бренды

Dell S5830DN, Руководство пользователя

Результаты поиска

Содержание S5830DN

Отзывы:

Бренды по названию

Популярные бренды