manualshive.com logo in svg

Dell S4048-ON, Руководство по настройке

Поделиться
Скачать
Dell S4048-ON Скачать руководство пользователя страница 43

The 

no-more

 command displays the output all at once rather than one screen at a time. This is similar to the 

terminal length 

command except that the 

no-more

 option affects the output of the specified command only.

The 

save

 command copies the output to a file for future reference.

NOTE: You can filter a single command output multiple times. The 

save

 option must be the last option entered. For 

example:

 Dell# command | grep regular-expression | except regular-expression | grep 

other-regular-expression | find regular-expression | save

.

Multiple Users in Configuration Mode

Dell Networking OS notifies all users when there are multiple users logged in to CONFIGURATION mode.

A warning message indicates the username, type of connection (console or VTY), and in the case of a VTY connection, the IP 
address of the terminal on which the connection was established. For example:

•

On the system that telnets into the switch, this message appears:

% Warning: The following users are currently configuring the system:

User "<username>" on line console0

•

On the system that is connected over the console, this message appears:

% Warning: User "<username>" on line vty0 "10.11.130.2" is in configuration mode

If either of these messages appears, Dell Networking recommends coordinating with the users listed in the message so that you do 
not unintentionally overwrite each other’s configuration changes.

Configuration Fundamentals

43

Содержание S4048-ON
















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды