manualshive.com logo in svg

Dell S4048-ON, Руководство по настройке

Поделиться
Скачать
Dell S4048-ON Скачать руководство пользователя страница 309

Table 27. FIP Functions

FIP Function

Description

FIP VLAN discovery

FCoE devices (ENodes) discover the FCoE VLANs on which to 
transmit and receive FIP and FCoE traffic.

FIP discovery

FCoE end-devices and FCFs are automatically discovered.

Initialization

FCoE devices learn ENodes from the FLOGI and FDISC to allow 
immediate login and create a virtual link with an FCoE switch.

Maintenance

A valid virtual link between an FCoE device and an FCoE switch 
is maintained and the LOGO functions properly.

Logout

On receiving a FLOGI packet, FSB deletes all existing sessions 
from the ENode to the FCF.

Figure 42. FIP Discovery and Login Between an ENode and an FCF

FIP Snooping on Ethernet Bridges

In a converged Ethernet network, intermediate Ethernet bridges can snoop on FIP packets during the login process on an FCF. Then, 
using ACLs, a transit bridge can permit only authorized FCoE traffic to be transmitted between an FCoE end-device and an FCF. An 
Ethernet bridge that provides these functions is called a FIP snooping bridge (FSB).

On a FIP snooping bridge, ACLs are created dynamically as FIP login frames are processed. The ACLs are installed on switch ports 
configured for ENode mode for server-facing ports and FCF mode for a trusted port directly connected to an FCF.
Enable FIP snooping on the switch, configure the FIP snooping parameters, and configure CAM allocation for FCoE. When you 
enable FIP snooping, all ports on the switch by default become ENode ports.

FCoE Transit

309

Содержание S4048-ON
















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды